When target is stopped in WFI/WFE or is in an infinite loop, the
sampled PC will always return the same value.
Command 'profile' requires that distance between min and max PC
should be at least 2, which is not the case for constant PC, and
incorrectly enforces the check through as assert().
Move the code that reads the optional parameters 'start' and 'end'
and check the gap 'end - start' before running the profile.
For self-computed min and max, increase max (or decrease min) to
match the required constraint.
Drop the assert().
Change-Id: I2be8df8568ce8c889923888c492e4f7ce354b16b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7400
Tested-by: jenkins
The implementation of command 'monitor profile' has few
issues:
- the address_space is a signed int, so cannot wrap-around on
space over INT_MAX;
- max address is incremented without check for overflow;
- assert() used on errors instead of returning error codes;
- only handles 32 bits PC;
- output file created and left empty on error.
This patch fixes the first two issues, as a wider fix would be too
invasive and should be postponed in a following series.
Change-Id: Id8ead3f6db0fd5730682a0d1638f11836d06a632
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7394
Tested-by: jenkins
Clang complains about the variable 'orig_dfsr' that can be used
uninitialized both in cortex_a_read_cpu_memory() and in
cortex_a_write_cpu_memory().
The issue is caused by an incorrect error path that used to jump
through 'goto out'. The code after the label 'out' is specific to
handle the case of an error during memory R/W; it is incorrect to
jump there to handle an error during the initialization that
precedes the memory R/W.
Replace the 'goto out' with 'return retval'.
Remove the label 'out' that is now unused.
Change-Id: Ib4b140221d1c1b63419de109579bde8b63fc2e8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7393
Tested-by: jenkins
Commit 35a503b08d ("arm_adi_v5: add ap refcount and add get/put
around ap use") modifies the examine functions of mem_ap, cortex_m,
cortex_a and aarch64 by calling dap_put_ap() and then looking again
for the mem-ap and calling dap_get_ap().
This causes an issue if the system is irresponsive and the examine
fails and left the AP pointer to NULL. If the system was already
examined the NULL pointer will cause a SIGSEGV.
Commit b6dad912b8 ("target/cortex_m: prevent segmentation fault
in cortex_m_poll()") proposes a fix for one specific case and only
on cortex_m.
Modify all the examine functions by skipping look-up for the AP if
it was already set in a previous examine; the target's AP is not
supposed to change during runtime.
Remove the partial fix for cortex_m as it is not needed anymore.
Change-Id: I806ec3b1b02fcc76e141c8dd3a65044febbf0a8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 35a503b08d ("arm_adi_v5: add ap refcount and add get/put around ap use")
Reviewed-on: https://review.openocd.org/c/openocd/+/7392
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Without the fix, will see "Can not find free FP Comparator" error log
Change-Id: Id0d91cc02b7055e44d27507f9c05ccd48ff49838
Signed-off-by: Nima Palizban <n.palizban@gmail.com>
Fixes: fb43f1ff4e (target: Rework 'set' variable of break-/watchpoints)
Reviewed-on: https://review.openocd.org/c/openocd/+/7389
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If multiple targets are specified as -rtos <rtos_type>, the
rtos_update_threads was called only if the last target was specified as
rtos, which is inconsistent with other checks of whether or not smp target
is an rtos one.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: Ie52bc6b6c8f841d31b9590fcbc44e985d3cba0eb
Reviewed-on: https://review.openocd.org/c/openocd/+/7244
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
armv7m_start_algorithm() saves register values to arch_info->context.
armv7m_wait_algorithm() restores register values from arch_info->context.
Exclude registers with flag exist = false from both loops.
While on it refactor the register restore: introduce 'struct reg' pointer
and dereference it instead of numerous accesses by a full path
from armv7m pointer.
Change-Id: I1600084db84809ee13bcf8e7828b79f8c9ff9077
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7276
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang get confused by initializing the array uint16_t lock_word[],
casting it to (uint8_t *), then accessing the second element of
the uint8_t pointer.
src/target/dsp5680xx.c:2046:41: warning: The left operand of '<<'
is a garbage value [core.UndefinedBinaryOperatorResult]
uint16_t tmp = (buffer[0] | (buffer[1] << 8));
~~~~~~~~~ ^
Fix it by replacing the array with a single uint16_t.
The code is still depending on host endianness; no fix for this is
proposed.
Change-Id: I16dfd60cab117dd145aeecf10d9593574ff233a2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7302
Tested-by: jenkins
The function esirisc_jtag_recv() can be called with argument
num_in_fields = 0, for example as consequence of calling
esirisc_jtag_continue().
In this case, num_in_bytes is zero and the allocation of the
variable-length array 'r' requires size zero.
src/target/esirisc_jtag.c:133:2: warning: Declared variable-length
array (VLA) has zero size [core.VLASize]
uint8_t r[num_in_bytes * 2];
^~~~~~~~~ ~~~~~~~~~~~~~~~~
Fix it by forcing size one when num_in_bytes is zero.
Change-Id: Id764c7b5ec4f5b3c18c7da650bbff39fc98ed049
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7301
Tested-by: jenkins
Clang assumes that size could assume a value that is not 1 nor 2
nor 4. In such condition the buffer in t is allocated (size != 1)
and not initialized. This triggers an error:
src/target/openrisc/or1k_du_adv.c:655:14: warning: 2nd function
call argument is an uninitialized value [core.CallAndMessage]
crc_calc = adbg_compute_crc(crc_calc, data[i], 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add the default case to cover other values of size.
After this fix, clang still complains on the same line, this time
misunderstanding the limits of the loop and considering that
buf_bswap16() only swaps the first 16 bits, thus passing not
initialized value data[2] to adbg_compute_crc()
Replace malloc() with calloc() to silent it.
Change-Id: I358d7fb2ebefd69255670641bd435b770762a301
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7300
Tested-by: jenkins
`xtensa_do_step` is invoked from `xtensa_prepare_resume` to silently
step over BP/WP before resuming.
For example; in the case of WPs (DEBUGCAUSE_DB), in the current
implementation `xtensa_do_step` will generate one more
`TARGET_EVENT_HALTED` after the original one caused by WP itself.
This patch moves the halted event cb call after
the step is done successfully.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9048e14fb316dc124847a42cfaefb1f76b5ce53e
Reviewed-on: https://review.openocd.org/c/openocd/+/7274
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Fix the declaration of riscv command 'set_mem_access'.
- Remove non existing riscv command 'set_scratch_ram'.
- Add riscv commands 'info', 'reset_delays'; copy the description
from the 'help' text.
- Don't add riscv commands 'set_prefer_sba' and 'test_sba_config_reg'
as they are marked as deprecated.
- Ensure that 'test_sba_config_reg' prints a deprecation warning
when used.
Change-Id: I39dc3aec4e7f13b69ac19685f1b593790acdde83
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7268
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
Currently 'number' field is zero in the register cache and
this causes an issue on `rtos get_thread_reg_list` calls.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iaef11e01f55d012969bbc1933f82847d5e02fec5
Reviewed-on: https://review.openocd.org/c/openocd/+/7246
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
arp_waitstate will not work on not-examined state
Change-Id: I56c3e1c7e63af108e4ed1dbacebb567f9bf46264
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7230
Tested-by: jenkins
Reviewed-by: Erwan Gouriou
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: I7c3de39fb1e6c23b76e2a0a85ab75f23aac94c4d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7229
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: Ife875a966a838c37dde987bc584ad0a1f4d020d6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7228
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After merging [1] 'reset halt' does not work on not responding Cortex-M.
Relax the examined tests and try to set vector catch VC_CORERESET
if debug_ap is available.
While on it add an info about examination state to debug logs.
Fixes: [1] commit 98d9f1168c ("target: reset target examined flag if target::examine() fails")
Change-Id: Ie2e018610026180af5997d70231061a275f05c76
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6745
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
For 64-bit TAR setup, if 'tar_valid == false' perform the upper 32-bit
write even if the cached copy matches the upper TAR value to be written.
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: I320377dc90a9d1d7b64cbb281b2527e56c7621ee
Reviewed-on: https://review.openocd.org/c/openocd/+/7245
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Read values must be at albuff so that can be copied to buffer
on function exit.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I74a533e8f12f1002ca06a98a7c7cd928552b4cc5
Reviewed-on: https://review.openocd.org/c/openocd/+/7226
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Actually they are the base of epc and eps
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I4f43b9609a9929399fb5d3fa0203efc8a98e94c9
Reviewed-on: https://review.openocd.org/c/openocd/+/7227
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
armv7m_start_algorithm() stored all non-debug execution
registers from register cache without checking validity.
Check if the register cache is valid.
Try to read from CPU if not valid.
Issue a warning if register read fails.
Change-Id: I365f86d65243230cf521b13909575e5986a87a50
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7240
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
swd_multidrop_select() uses its own retry loop.
If select fails, do_reconnect flag remains set on exit and causes
useless reconnect.
Clear do_reconnect flag in retry loop.
Change-Id: Ie06d6967d7f4a977774c8530bb8d4b3e5ab4f62c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7217
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Implementation of ADI v6 introduced banking of DP reg 0.
The accompanying change preventing DP SELECT write before
DP IDR read during connect was added to swd_connect_single() only.
Unchanged swd_connect_multidrop() / swd_multidrop_select_inner()
was broken as it emited DP SELECT and put DP to protocol error state.
Copy dap->select handling to swd_multidrop_select_inner().
Fixes: 72fb88613f (adiv6: add low level swd transport)
Change-Id: I514cd6d9ae2ba97ce3657b459df22638c278a0b1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7213
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Increase "value_buf" size so it can hold a 64-bit number represented
as a string. Previous size could only hold a 32-bit number string.
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: If6fbc875236e6ddc59522fbc25db0129eb60ee27
Reviewed-on: https://review.openocd.org/c/openocd/+/7221
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Scan-build reports:
Logic error: Uninitialized argument value
riscv.c:2688 2nd function call argument is an uninitialized value
This is a real error cause by running the command "riscv
authdata_write" without arguments. In such case 'value' is not
initialized and is passed to and used by r->authdata_write().
Reorganize the code to:
- detect the correct amount or command's arguments;
- drop the LOG_ERROR() on ERROR_COMMAND_SYNTAX_ERROR;
- drop the 'else' after 'return'.
Change-Id: I62e031220593b8308bc674b753e15d16d4c5c9ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7210
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Scan-build reports:
Logic error: Result of operation is garbage or undefined
riscv.c:1614 The result of the left shift is undefined due
to shifting by '4294967281', which is greater or
equal to the width of type 'target_addr_t'
This is a false warning due to clang that considers the impossible
case of 32 bits hart (xlen = 32) in SATP_MODE_SV48 mode
(info->va_bits = 48).
Under such case:
riscv.c:1614 ... ((target_addr_t)1 << (xlen - (info->va_bits - 1))) ...
the shift amount wraps around the unsigned type and assumes the
value 4294967281 (0xfffffff1).
Use assert() to prevent clang from complaining.
Change-Id: I08fdd2a806c350d061641e28cf15a51b397db099
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7209
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead nested assignment
riscv.c:459 Although the value stored to 'ir_user4_raw' is
used in the enclosing expression, the value is
never actually read from 'ir_user4_raw'
This is caused by the value reassigned in 'ir_user4_raw':
riscv.c:459 ir_user4[3] = (uint8_t)(ir_user4_raw >>= 8);
but never used.
Drop the DIY conversion in favor of h_u32_to_le() that does not
reassign the input value.
Change-Id: Ifad29f4c46d4a2d0a2f5a5c4104d768cc3db2794
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7208
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead assignment
riscv.c:716 Value stored to 'result' is never read
Remove the initialization of variable 'result'.
Change-Id: Ied67bb4fcfa5bace186522074247ead43a5d5cd5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7207
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead initialization
riscv-013.c:2362 Value stored to 'control' during its
initialization is never read
Remove the initialization of variable 'control'.
Change-Id: I548f8175530b9a2aa4c1788549d6467bf9824584
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7206
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build complains about variable 'sbcs_orig' that can be used
not initialized.
Logic error: Assigned value is garbage or undefined
riscv-013.c:4468 Assigned value is garbage or undefined
This is caused by not checking the return value of the call
riscv-013.c:4466 dmi_read(target, &sbcs_orig, DM_SBCS);
In fact when dmi_read() returns error, the variable 'sbcs_orig' is
not assigned.
Check the returned value.
Change-Id: Ia9032a0229aa243138f95f4e13f765726a4ceae9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7205
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build triggers a warning:
Unix API: Allocator sizeof operand mismatch
dsp563xx.c:2143 Result of 'calloc' is converted to a pointer
of type 'uint8_t', which is incompatible with sizeof
operand type 'uint32_t'
It's a false positive because calloc() is properly used in this
case, as the uint8_t array is used in blocks of 4 elements to read
or write uint32_t values.
Either
calloc(sizeof(uint32_t), count);
and
malloc(count * sizeof(uint32_t));
keep triggering the same warning.
Drop the warning by using the constant '4' as size of uint32_t, as
already used few lines below.
Change-Id: I5bb1ece177774eefdc5d9cd049338f8f2be87cd7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7203
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
With the old checkpatch we cannot use the correct format for the
SPDX tags in the file .c, in fact the C99 comments are not allowed
and we had to use the block comment.
With the new checkpatch, let's switch to the correct SPDX format.
Change created automatically through the command:
sed -i \
's,^/\* *\(SPDX-License-Identifier: .*[^ ]\) *\*/$,// \1,' \
$(find src/ contrib/ -name \*.c)
Change-Id: I6da16506baa7af718947562505dd49606d124171
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7153
Tested-by: jenkins
Resolves issues where registers are accessed when poll() logic is inactive or has not yet been triggered.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: If7a4d00938fb188b008325249627f7773c3484c5
Reviewed-on: https://review.openocd.org/c/openocd/+/7197
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Read PS from EPS[debuglevel] during fetch such that it reflects the correct value when read via telnet (not just via gdb_server).
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I8504f68989bc6d5fe451a8cb69d01c86f4ec0100
Reviewed-on: https://review.openocd.org/c/openocd/+/7195
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The method soft_reset_halt is optional; no need to add an
empty function.
Remove mips_mips64_soft_reset_halt() and move the TODO comment
in struct target_type.
Change-Id: Id541a75e7a08645568961d59b73a120c2238701f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7184
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Read buffer is sized for 32-bit APB version of PWRSTAT/PWRCTL registers. Initialize to zero so 8-bit JTAG register mirrors are accurate.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I81310649fa7180893d0188aab3c8a14315aaea0a
Reviewed-on: https://review.openocd.org/c/openocd/+/7183
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Symbols that are not used outside the file should not be exported
and should be declared as static.
Change-Id: Icbe7f7bce287b903edec9dc9db3370722c51fbd5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7173
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Symbols that are not used outside the file should not be exported
and should be declared as static.
Move the existing comments to the static declarations.
Change-Id: Idf208e3fda4b3f8df789553cf03ebf5f20d811bb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7170
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: I2475524f4c14520e3163572560f4a9f276356ed5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7168
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Symbols that are not exported should be declared as static.
Change-Id: Ieb627f7f896e4663b0d5b18c4ab1853b39d23d03
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7167
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: Ie3bd17535c8cb2a0fec5d3bedfe7de3e0a702613
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7166
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
For some configurations, notably on DAP systems, resolve issue where single-stepping does not always transition into the HALTED state.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I053f4eaffad8c3228878ba87580ada640e4bd2fe
Reviewed-on: https://review.openocd.org/c/openocd/+/7150
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Enable ADIv5 DAP systems via JTAG or SWD transport
- Select correct PWRCTL/PWRSTAT bits for XDM/APB
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I5894210c804f85075da868d0cfc6fb20b589d99f
Reviewed-on: https://review.openocd.org/c/openocd/+/7144
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We have left the camelcase symbols *xPSR* for some time, to avoid
any conflict with possibly pending patches in gerrit.
With the approaching v0.12.0-rc1, it's time to revisit it.
The patches in gerrit that conflict with this rename are all not
merge-able due to conflicts or due to negative review.
Drop these CamelCase symbols.
Change-Id: Ifbac4c1df9cc55994e024971a2aaebeed2ea4ed3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7155
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Without the help of checkpatch, some CamelCase symbol passed
through the filter of maintainer's review.
Drop them.
Change-Id: If5fb07b2ffb89e853dd2a61f20d4134aa6e20d24
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 48f267d4ad ("flash/stm32l4x: avoid using magic numbers for device ids")
Fixes: 5ab74bde06 ("semihosting: User defined operation, Tcl command exec on host")
Reviewed-on: https://review.openocd.org/c/openocd/+/7154
Tested-by: jenkins
