mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-22 06:21:05 +10:00
074498f836
Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
26 lines
1.0 KiB
INI
26 lines
1.0 KiB
INI
# Configuration for the ST SPEAr310 Evaluation board
|
|
# EVALSPEAr310 Rev. 2.0, modified to enable SRST on JTAG connector
|
|
# http://www.st.com/spear
|
|
#
|
|
# List of board modifications to enable SRST, as per ST Application Note
|
|
# (FIXME: put reference to AN)
|
|
# - Modifications on the top layer:
|
|
# 1. remove R137 and C57, located near the SMII PHY U18;
|
|
# 2. remove R172 and C75, located near the SMII PHY U19;
|
|
# 3. remove R207 and C90, located near the SMII PHY U20;
|
|
# 4. remove C236, located near the SMII PHY U21;
|
|
# 5. remove U12, located near the JTAG connector;
|
|
# 6. solder together pins 7, 8 and 9 of U12;
|
|
# 7. solder together pins 11, 12, 13, 14, 15, 16, 17 and 18 of U12.
|
|
# - Modifications on the bottom layer:
|
|
# 8. replace reset chip U11 with a STM6315SDW13F;
|
|
# 9. add 0 ohm resistor R329. It is located close to JTAG connector.
|
|
#
|
|
# Date: 2009-10-31
|
|
# Author: Antonio Borneo <borneo.antonio@gmail.com>
|
|
|
|
|
|
# Modified boards has SRST on JTAG connector
|
|
set BOARD_HAS_SRST 1
|
|
source [find board/spear310evb20.cfg]
|