Patrick Stewart 1003bc7be7 ftdi swd: disable SWD output pin during input ... * Disables the data output pin while SWD is reading, so that a simple FTDI SWD interface can be made by connecting TCK to SWD_CLK and TDI+TDO directly to SWDIO. Enabled by setting SWDIO_OE to 0. Change-Id: I7d3b71cf3f4eea163cb320aff69ed95d219190bd Signed-off-by: Patrick Stewart <patstew@gmail.com> Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com> Reviewed-on: http://openocd.zylin.com/2274 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins		2018-01-13 11:37:13 +00:00
..
ftdi	ftdi swd: disable SWD output pin during input	2018-01-13 11:37:13 +00:00
altera-usb-blaster2.cfg
altera-usb-blaster.cfg
arm-jtag-ew.cfg
at91rm9200.cfg
buspirate.cfg
calao-usb-a9260.cfg
chameleon.cfg
cmsis-dap.cfg
dummy.cfg
estick.cfg
flashlink.cfg
imx-native.cfg	imx_gpio: add mmap based jtag interface for IMX processors	2017-05-31 08:16:17 +01:00
jlink.cfg	interface/jlink: Fix comment about serial number	2016-04-12 17:03:02 +01:00
jtag_vpi.cfg
kitprog.cfg	jtag/drivers: Add Cypress KitProg driver	2017-05-12 10:08:43 +01:00
nds32-aice.cfg
opendous.cfg
openjtag.cfg
osbdm.cfg
parport_dlc5.cfg
parport.cfg
raspberrypi2-native.cfg	bcm2835gpio: Add SWD support, Raspberry Pi 2 support.	2015-08-06 13:16:02 +01:00
raspberrypi-native.cfg	bcm2835gpio: Add SWD support, Raspberry Pi 2 support.	2015-08-06 13:16:02 +01:00
rlink.cfg
stlink-v1.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink-v2-1.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink-v2.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
sysfsgpio-raspberrypi.cfg
ti-icdi.cfg
ulink.cfg
usb-jtag.cfg	Remove support for the GPL incompatible FTDI D2XX library	2016-11-06 09:47:12 +00:00
usbprog.cfg
vsllink.cfg