mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-26 11:05:52 +10:00
7682877c8c
Hi everyone. I noticed some incorrect information in the user manual regarding how the vector table is handled on the xscale, so for your consideration, here's a short patch that corrects it, and adds a little more detail I thought might be helpful. The documentation states that OpenOCD does not attempt to synchronize the vector tables in memory with those stored in the "mini instruction cache". In fact, on each resume it does copy from memory to the cache all entries in the high and low tables that were not previously defined using the 'xscale vector_table' command. (In src/target/xscale.c, see xscale_update_vectors(), which is invoked by xscale_resume().) I take advantage of this during Linux boot-up. The extra detail describes in general terms how I do this. Corrections, comments are of course gratefully received. Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com> |
||
|---|---|---|
| .. | ||
| manual | ||
| fdl.texi | ||
| INSTALL.txt | ||
| Makefile.am | ||
| openocd.1 | ||
| openocd.texi | ||