mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-19 05:55:41 +10:00
bec6c0eb09
Speed calibration coeffs are computed from cpufreq/scaling_max_freq and from the device-tree compatibility information. Raspberry Pi linux offers /dev/gpiomem for non-root access to the GPIO registers since ~2016. Do not configure 'bcm2835gpio peripheral_base' as it is necessary only if /dev/mem is used - it requires running OpenOCD as root - it's a security risk so it should be avoided. The configuration of the GPIO connector (40-pin header) is factored out and ready to use in interface configuration for other driver (e.g. linux gpiod). Mark raspberrypi2-native.cfg as deprecated and redirect it to raspberrypi-native.cfg Change-Id: Icce856fb660b45374e94174da279feb51f529908 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/7264 Tested-by: jenkins Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> |
||
|---|---|---|
| .. | ||
| board | ||
| chip | ||
| cpld | ||
| cpu | ||
| fpga | ||
| interface | ||
| target | ||
| test | ||
| tools | ||
| bitsbytes.tcl | ||
| mem_helper.tcl | ||
| memory.tcl | ||
| mmr_helpers.tcl | ||