mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-23 17:05:48 +10:00
38ac08c1c2
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
75 lines
1.7 KiB
INI
75 lines
1.7 KiB
INI
#
|
|
# bluenrg-1/2 devices support only SWD transports.
|
|
#
|
|
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME bluenrg-1
|
|
}
|
|
|
|
set _ENDIAN little
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 24kB-256bytes
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x5F00
|
|
}
|
|
|
|
adapter speed 4000
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x0bb11477
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
set WDOG_VALUE 0
|
|
set WDOG_VALUE_SET 0
|
|
|
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000100 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
# flash size will be probed
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME bluenrg-x 0 0 0 0 $_TARGETNAME
|
|
|
|
# In BlueNRG-X reset pin is actually a shutdown (power-off), so define reset as none
|
|
reset_config none
|
|
|
|
if {![using_hla]} {
|
|
# if srst is not fitted use SYSRESETREQ to
|
|
# perform a soft reset
|
|
cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
$_TARGETNAME configure -event halted {
|
|
global WDOG_VALUE
|
|
global WDOG_VALUE_SET
|
|
# Stop watchdog during halt, if enabled
|
|
mem2array value 32 0x40700008 1
|
|
set WDOG_VALUE [expr ($value(0))]
|
|
if [expr ($value(0) & (1 << 1))] {
|
|
set WDOG_VALUE_SET 1
|
|
mww 0x40700008 [expr ($value(0) & 0xFFFFFFFD)]
|
|
}
|
|
}
|
|
$_TARGETNAME configure -event resumed {
|
|
global WDOG_VALUE
|
|
global WDOG_VALUE_SET
|
|
if [expr $WDOG_VALUE_SET] {
|
|
# Restore watchdog enable value after resume
|
|
mww 0x40700008 $WDOG_VALUE
|
|
set WDOG_VALUE_SET 0
|
|
}
|
|
}
|