Edward Fewell 5fd1cb0e5b icepick.cfg: add cancel reset bit to TAP register writes ... The Agama family of devices (CC26x2/CC13x2) required an additional bit to be set when adding the core's TAP into the scan chain. The cancel reset bit 0x10000 tells the ICEPick to take the bus out of reset so that the other bits will take effect. This bit is a NOP on other devices and ICEPicks, so the change shouldn't adversely affect other devices. Change-Id: I9245eef0936ea7eea28ae84ab5e8ce05fa63af40 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>		2019-01-08 09:51:13 +00:00
..
board	flash: nor: ath79: remove base calculation	2019-01-02 21:53:41 +00:00
chip
cpld	xilinx-xc7: Add additional IDCODEs.	2018-10-27 14:37:43 +01:00
cpu/arm
fpga	fpga/altera-10m50: add all device id	2018-07-31 18:56:14 +01:00
interface	stlink: add support for STLINK-V3	2018-12-06 13:06:59 +00:00
target	icepick.cfg: add cancel reset bit to TAP register writes	2019-01-08 09:51:13 +00:00
test
tools	tcl/board: add Linksys WAG200G config	2016-10-17 09:16:33 +01:00
bitsbytes.tcl
mem_helper.tcl	mem_helper: add mrh command	2018-12-06 09:38:41 +00:00
memory.tcl	target: add "phys" argument to mem2array, array2mem	2016-08-09 14:32:12 +01:00
mmr_helpers.tcl