2
0
mirror of git://git.code.sf.net/p/openocd/code synced 2025-07-21 00:42:15 +10:00
openocd/doc/configs/arm9_ft2232.cfg
drath 9a830747b2 - fixed bug in .cfg files. Thanks to Michael Fischer for noticing this.
git-svn-id: svn://svn.berlios.de/openocd/trunk@86 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14 15:45:11 +00:00

29 lines
741 B
INI

#daemon configuration
telnet_port 4444
gdb_port 3333
#interface
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout "jtagkey"
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 1
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe
#target configuration
daemon_startup reset
#target <type> <endianess> <reset mode>
target arm9tdmi little reset_halt 0 arm920t
working_area 0 0x200000 0x4000 backup
run_and_halt_time 0 5000
#flash configuration
#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
flash bank cfi 0x10000000 0x800000 2 2 0