mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-19 08:38:14 +10:00
5a98ff786e
Make all configs specify same JTAG and SWD GPIO numbers. Change-Id: I65b09c1671c97f253f0aab88e511de7409d91e0a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3932 Tested-by: jenkins
32 lines
820 B
INI
32 lines
820 B
INI
#
|
|
# Config for using RaspberryPi's expansion header
|
|
#
|
|
# This is best used with a fast enough buffer but also
|
|
# is suitable for direct connection if the target voltage
|
|
# matches RPi's 3.3V
|
|
#
|
|
# Do not forget the GND connection, pin 6 of the expansion header.
|
|
#
|
|
|
|
interface sysfsgpio
|
|
|
|
# Each of the JTAG lines need a gpio number set: tck tms tdi tdo
|
|
# Header pin numbers: 23 22 19 21
|
|
sysfsgpio_jtag_nums 11 25 10 9
|
|
|
|
# Each of the SWD lines need a gpio number set: swclk swdio
|
|
# Header pin numbers: 23 22
|
|
sysfsgpio_swd_nums 11 25
|
|
|
|
# If you define trst or srst, use appropriate reset_config
|
|
# Header pin numbers: TRST - 26, SRST - 18
|
|
|
|
# sysfsgpio_trst_num 7
|
|
# reset_config trst_only
|
|
|
|
# sysfsgpio_srst_num 24
|
|
# reset_config srst_only srst_push_pull
|
|
|
|
# or if you have both connected,
|
|
# reset_config trst_and_srst srst_push_pull
|