2
0
mirror of git://git.code.sf.net/p/openocd/code synced 2025-07-21 00:42:15 +10:00
openocd/doc/configs/xscale_ixp42x.cfg
bodylove 7d9e292751 - Added example config and startup-script for a XScale IXP42x system
git-svn-id: svn://svn.berlios.de/openocd/trunk@272 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21 20:51:01 +00:00

41 lines
1.0 KiB
INI

#--- Daemon configuration ------------------------
telnet_port 4444
gdb_port 3333
daemon_startup reset
#--- JTAG interface configuration ----------------
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#-- Reset options available
reset_config trst_and_srst
#-- jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 7 0x1 0x7f 0x7e
#--- Target Configuration ------------------------
#target <type> <endianess> <startup mode> <jtagpos> <variant>
#target xscale big reset_init 0 IXP42x
target xscale big reset_halt 0 IXP42x
target_script 0 reset uc7420-rb.ocd
run_and_halt_time 0 2500
working_area 0 0x00100000 0x00010000 nobackup
flash bank cfi 0x50000000 0x01000000 2 2 0
flash bank cfi 0x51000000 0x01000000 2 2 0
# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger