Paul Fertser 66e20117e8 drivers/jlink: fix SWD speed config, and set it before sending anything ... During the initialisation a driver might need to communicate with the target (e.g. sending jtag2swd sequence), so when doing so it should honour the user-specified speed. Change-Id: If84fea6057fda9edcf2c0a653edfbab2500e3cdd [andrew.smirnov@gmail.com: fix khz/hz confusion] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2224 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>		2014-08-02 13:53:59 +00:00
..
flash	Adding support for the Atmel SAMR21.	2014-07-10 21:18:30 +00:00
helper	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
jtag	drivers/jlink: fix SWD speed config, and set it before sending anything	2014-08-02 13:53:59 +00:00
pld	update files to correct FSF address	2013-06-05 19:52:42 +00:00
rtos	Don't cast return value of [cm]alloc	2014-03-30 03:53:45 +00:00
server	openrisc: add support for JTAG Serial Port	2014-06-22 08:39:08 +00:00
svf	Openocd: svf: Add ability to ignore svf_check_tdo errors	2014-07-03 18:08:48 +00:00
target	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
transport	transport: Constify the transports vector	2014-06-28 09:33:31 +00:00
xsvf	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
hello.h	update files to correct FSF address	2013-06-05 19:52:42 +00:00
main.c	update files to correct FSF address	2013-06-05 19:52:42 +00:00
Makefile.am	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
openocd.c	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00
openocd.h	Fix some problems with the bin2char utility	2014-08-02 09:01:32 +00:00