mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-23 17:05:48 +10:00
6bc0a77a6e
Extended bluenrg-x flash driver with BlueNRG-LP flash controller. Changes include: - register set for the flash controller - made software structure prone to support more easily future devices - updated target config file Change-Id: I2e2dc70db32cf98c62e3a43f2e44a4600a25ac5b Signed-off-by: luca vinci <luca.vinci@st.com> Reviewed-on: http://openocd.zylin.com/5343 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
81 lines
2.0 KiB
INI
81 lines
2.0 KiB
INI
#
|
|
# bluenrg-1/2 and bluenrg-lp devices support only SWD transports.
|
|
#
|
|
|
|
source [find target/swj-dp.tcl]
|
|
source [find mem_helper.tcl]
|
|
|
|
if { [info exists CHIPNAME] } {
|
|
set _CHIPNAME $CHIPNAME
|
|
} else {
|
|
set _CHIPNAME bluenrg-1
|
|
}
|
|
|
|
set _ENDIAN little
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 24kB-256bytes
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x5F00
|
|
}
|
|
|
|
adapter speed 4000
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
set _CPUTAPID 0x0bb11477
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
|
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
|
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
set WDOG_VALUE 0
|
|
set WDOG_VALUE_SET 0
|
|
|
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
|
|
|
|
$_TARGETNAME configure -work-area-phys 0x20000100 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
# flash size will be probed
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
flash bank $_FLASHNAME bluenrg-x 0 0 0 0 $_TARGETNAME
|
|
|
|
# In BlueNRG-X reset pin is actually a shutdown (power-off), so define reset as none
|
|
reset_config none
|
|
|
|
if {![using_hla]} {
|
|
# if srst is not fitted use SYSRESETREQ to
|
|
# perform a soft reset
|
|
cortex_m reset_config sysresetreq
|
|
}
|
|
|
|
$_TARGETNAME configure -event halted {
|
|
global WDOG_VALUE
|
|
global WDOG_VALUE_SET
|
|
set _JTAG_IDCODE [mrw 0x40000004]
|
|
if {$_JTAG_IDCODE != 0x0201E041} {
|
|
# Stop watchdog during halt, if enabled. Only Bluenrg-1/2
|
|
set WDOG_VALUE [mrw 0x40700008]
|
|
if [expr ($WDOG_VALUE & (1 << 1))] {
|
|
set WDOG_VALUE_SET 1
|
|
mww 0x40700008 [expr ($WDOG_VALUE & 0xFFFFFFFD)]
|
|
}
|
|
}
|
|
}
|
|
$_TARGETNAME configure -event resumed {
|
|
global WDOG_VALUE
|
|
global WDOG_VALUE_SET
|
|
set _JTAG_IDCODE [mrw 0x40000004]
|
|
if {$_JTAG_IDCODE != 0x0201E041} {
|
|
if [expr $WDOG_VALUE_SET] {
|
|
# Restore watchdog enable value after resume. Only Bluenrg-1/2
|
|
mww 0x40700008 $WDOG_VALUE
|
|
set WDOG_VALUE_SET 0
|
|
}
|
|
}
|
|
}
|