David Brownell 844b5eb49d don't require 'openocd.cfg' to start ... Starting the daemon with with just a bare "openocd" I saw: Can't find openocd.cfg That's not an error; don't treat it as if it were. There may be an error later -- like, "no interface set up" -- but let messages only report real errors, not fake ones.		2010-01-05 13:32:39 -08:00
..
flash	streamline and document helptext mode displays	2010-01-02 15:52:35 -08:00
helper	don't require 'openocd.cfg' to start	2010-01-05 13:32:39 -08:00
jtag	parport: output port as hex rather than dec	2010-01-05 19:54:36 +00:00
pld	build: add build/src to include path	2009-12-08 10:16:10 +01:00
server	gdb: fix regression in gdb_port command	2010-01-05 15:28:23 +01:00
svf	cygwin 1.7 build fixes	2009-12-26 10:19:19 -08:00
target	ARM: add #defines for JTAG ack codes	2010-01-05 13:03:27 -08:00
xsvf	build: add build/src to include path	2009-12-08 10:16:10 +01:00
ecosboard.c	zy1000: add zy1000_ prefix to uart command	2009-12-30 13:13:31 +01:00
hello.c	change #include "log.h" to <helper/log.h>	2009-12-03 04:22:52 -08:00
hello.h	improve command handling examples	2009-11-25 10:29:05 -08:00
main.c	add openocd.h for top-level declarations	2009-11-14 07:29:16 -08:00
Makefile.am	Driver for USB-JTAG, Altera USB-Blaster and compatibles	2009-12-26 15:05:06 -08:00
openocd.c	server: add server_preinit which is called before config file is parsed.	2009-12-11 10:26:15 +00:00
openocd.h	remove #if logic for openocd_sleep_*lude	2009-12-02 13:26:26 -08:00