Oleksij Rempel 8f777bc1a6 flash: nor: ath79: remove base calculation ... Currently it is impossible to flash ELF with correct offsets. The reason is a bogus offset calculation extracted from base. Since any other spi drivers do not care about base, do the same for ath79 as well. Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4821 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>		2019-01-02 21:53:41 +00:00
..
board	flash: nor: ath79: remove base calculation	2019-01-02 21:53:41 +00:00
chip
cpld	xilinx-xc7: Add additional IDCODEs.	2018-10-27 14:37:43 +01:00
cpu/arm
fpga	fpga/altera-10m50: add all device id	2018-07-31 18:56:14 +01:00
interface	stlink: add support for STLINK-V3	2018-12-06 13:06:59 +00:00
target	Add LPC8Nxx and NHS3xx support.	2018-12-23 15:08:36 +00:00
test	TCL scripts: replace "puts" with "echo"	2010-11-09 08:12:51 +01:00
tools	tcl/board: add Linksys WAG200G config	2016-10-17 09:16:33 +01:00
bitsbytes.tcl
mem_helper.tcl	mem_helper: add mrh command	2018-12-06 09:38:41 +00:00
memory.tcl	target: add "phys" argument to mem2array, array2mem	2016-08-09 14:32:12 +01:00
mmr_helpers.tcl