Antonio Borneo 0bad9a42a3 stlink: add support for STLINK-V3 ... Extend the driver to include the minimal functionality to support the HLA model. Due to the small change in the name (ST-LINK/V2 => STLINK-V3), fix the existing names in the comments in udev rules. Change-Id: Ied33e38063a6da81d9bf249ed195444d7cdf4f03 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4717 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>		2018-12-06 13:06:59 +00:00
..
ftdi	interface: adapter configuration for FTDI C232HM	2018-09-10 09:38:06 +01:00
altera-usb-blaster2.cfg
altera-usb-blaster.cfg	tcl: interface: usb blaster I: specify driver explicitly	2018-03-13 08:41:43 +00:00
arm-jtag-ew.cfg
at91rm9200.cfg
buspirate.cfg	Add SWD protocol support to buspirate (2nd try)	2018-03-12 14:14:36 +00:00
calao-usb-a9260.cfg
chameleon.cfg
cmsis-dap.cfg
dummy.cfg
estick.cfg
flashlink.cfg
ft232r.cfg	jtag: drivers: add support for FT232R sync bitbang JTAG interfaces	2018-03-13 08:47:46 +00:00
imx-native.cfg	imx_gpio: add mmap based jtag interface for IMX processors	2017-05-31 08:16:17 +01:00
jlink.cfg
jtag_vpi.cfg
kitprog.cfg	jtag/drivers: Add Cypress KitProg driver	2017-05-12 10:08:43 +01:00
nds32-aice.cfg
opendous.cfg
openjtag.cfg
osbdm.cfg
parport_dlc5.cfg
parport.cfg
raspberrypi2-native.cfg	tcl: interface: harmonise RPi configs	2018-01-30 07:39:24 +00:00
raspberrypi-native.cfg	tcl: interface: harmonise RPi configs	2018-01-30 07:39:24 +00:00
rlink.cfg
stlink-v1.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink-v2-1.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink-v2.cfg	jtag: drivers: stlink: handle all versions with single config	2017-12-12 21:13:55 +00:00
stlink.cfg	stlink: add support for STLINK-V3	2018-12-06 13:06:59 +00:00
sysfsgpio-raspberrypi.cfg	tcl: interface: harmonise RPi configs	2018-01-30 07:39:24 +00:00
ti-icdi.cfg
ulink.cfg
usb-jtag.cfg
usbprog.cfg
vsllink.cfg
xds110.cfg	jtag/drivers: Add support for TI XDS110 debug probe	2018-05-31 13:25:16 +01:00