mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-24 05:05:06 +10:00
c7384117c6
This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
73 lines
1.7 KiB
INI
73 lines
1.7 KiB
INI
#
|
|
# Target configuration for the ST STM32W108xx chips
|
|
#
|
|
# Processor: ARM Cortex M3
|
|
# Date: 2013-06-09
|
|
# Author: Giuseppe Barba <giuseppe.barba@gmail.com>
|
|
|
|
#
|
|
# stm32 devices support both JTAG and SWD transports.
|
|
#
|
|
source [find target/swj-dp.tcl]
|
|
|
|
if { [info exists CHIPNAME] == 0 } {
|
|
set _CHIPNAME stm32w108
|
|
} else {
|
|
set _CHIPNAME $CHIPNAME
|
|
}
|
|
|
|
# Work-area is a space in RAM used for flash programming
|
|
# By default use 8kB
|
|
if { [info exists WORKAREASIZE] } {
|
|
set _WORKAREASIZE $WORKAREASIZE
|
|
} else {
|
|
set _WORKAREASIZE 0x2000
|
|
}
|
|
|
|
if { [info exists CPUTAPID] } {
|
|
set _CPUTAPID $CPUTAPID
|
|
} else {
|
|
if { [using_jtag] } {
|
|
set _CPUTAPID 0x3ba00477
|
|
} {
|
|
set _CPUTAPID 0x1ba01477
|
|
}
|
|
}
|
|
|
|
if { [info exists ENDIAN] } {
|
|
set _ENDIAN $ENDIAN
|
|
} else {
|
|
set _ENDIAN little
|
|
}
|
|
|
|
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
|
|
|
if {[using_jtag]} {
|
|
if { [info exists BSTAPID] } {
|
|
set _BSTAPID $BSTAPID
|
|
swj_newdap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf -expected-id _BSTAPID
|
|
} else {
|
|
set _BSTAPID_1 0x169a862b
|
|
set _BSTAPID_2 0x269a862b
|
|
swj_newdap $_CHIPNAME bs -irlen 4 -ircapture 0xe -irmask 0xf \
|
|
-expected-id $_BSTAPID_1 -expected-id $_BSTAPID_2
|
|
}
|
|
}
|
|
#
|
|
# Set Target
|
|
#
|
|
set _TARGETNAME $_CHIPNAME.cpu
|
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
|
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
|
|
|
|
|
# Use the flash driver from the EM357
|
|
set _FLASHNAME $_CHIPNAME.flash
|
|
|
|
# 64k (0x10000) of flash
|
|
flash bank $_FLASHNAME em357 0x08000000 0x10000 0 0 $_TARGETNAME
|
|
|
|
if {![using_hla]} {
|
|
cortex_m reset_config sysresetreq
|
|
}
|