2
0
mirror of git://git.code.sf.net/p/openocd/code synced 2025-07-24 12:35:47 +10:00
openocd/tcl/target/aducm360.cfg
Marc Schink b27173d563 tcl: Remove executable bit
Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/5419
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-08 23:27:18 +00:00

57 lines
1.3 KiB
INI

#
# This file was created using as references the stm32f1x.cfg and aduc702x.cfg
#
source [find target/swj-dp.tcl]
# Chip name
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME aducm360
}
# Endianess
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
# Work-area is a space in RAM used for flash programming
# Eventually, the whole SRAM of ADuCM360 will be used (8kB)
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x2000
}
#jtag scan chain
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x2ba01477
}
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
# SWD/JTAG speed
adapter speed 1000
##
## Target configuration
##
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
# allocate the working area
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
# flash size will be probed
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME aducm360 0x00 0 0 0 $_TARGETNAME
adapter srst delay 100
cortex_m reset_config sysresetreq