mirror of
git://git.code.sf.net/p/openocd/code
synced 2025-07-25 14:06:37 +10:00
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
58 lines
2.0 KiB
INI
58 lines
2.0 KiB
INI
# Atheros AR71xx MIPS 24Kc SoC.
|
|
# tested on PB44 refererence board
|
|
|
|
adapter srst delay 100
|
|
jtag_ntrst_delay 100
|
|
|
|
reset_config trst_and_srst
|
|
|
|
set CHIPNAME ar71xx
|
|
|
|
jtag newtap $CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id 1
|
|
|
|
set _TARGETNAME $CHIPNAME.cpu
|
|
target create $_TARGETNAME mips_m4k -endian big -chain-position $_TARGETNAME
|
|
|
|
$_TARGETNAME configure -event reset-halt-post {
|
|
#setup PLL to lowest common denominator 300/300/150 setting
|
|
mww 0xb8050000 0x000f40a3 ;# reset val + CPU:3 DDR:3 AHB:0
|
|
mww 0xb8050000 0x800f40a3 ;# send to PLL
|
|
|
|
#next command will reset for PLL changes to take effect
|
|
mww 0xb8050008 3 ;# set reset_switch and clock_switch (resets SoC)
|
|
}
|
|
|
|
$_TARGETNAME configure -event reset-init {
|
|
#complete pll initialization
|
|
mww 0xb8050000 0x800f0080 ;# set sw_update bit
|
|
mww 0xb8050008 0 ;# clear reset_switch bit
|
|
mww 0xb8050000 0x800f00e8 ;# clr pwrdwn & bypass
|
|
mww 0xb8050008 1 ;# set clock_switch bit
|
|
sleep 1 ;# wait for lock
|
|
|
|
# Setup DDR config and flash mapping
|
|
mww 0xb8000000 0xefbc8cd0 ;# DDR cfg cdl val (rst: 0x5bfc8d0)
|
|
mww 0xb8000004 0x8e7156a2 ;# DDR cfg2 cdl val (rst: 0x80d106a8)
|
|
|
|
mww 0xb8000010 8 ;# force precharge all banks
|
|
mww 0xb8000010 1 ;# force EMRS update cycle
|
|
mww 0xb800000c 0 ;# clr ext. mode register
|
|
mww 0xb8000010 2 ;# force auto refresh all banks
|
|
mww 0xb8000010 8 ;# force precharge all banks
|
|
mww 0xb8000008 0x31 ;# set DDR mode value CAS=3
|
|
mww 0xb8000010 1 ;# force EMRS update cycle
|
|
mww 0xb8000014 0x461b ;# DDR refresh value
|
|
mww 0xb8000018 0xffff ;# DDR Read Data This Cycle value (16bit: 0xffff)
|
|
mww 0xb800001c 0x7 ;# delay added to the DQS line (normal = 7)
|
|
mww 0xb8000020 0
|
|
mww 0xb8000024 0
|
|
mww 0xb8000028 0
|
|
}
|
|
|
|
# setup working area somewhere in RAM
|
|
$_TARGETNAME configure -work-area-phys 0xa0600000 -work-area-size 0x20000
|
|
|
|
# serial SPI capable flash
|
|
# flash bank <driver> <base> <size> <chip_width> <bus_width>
|
|
|