mirror of
				https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux
				synced 2025-11-01 03:23:39 +10:00 
			
		
		
		
	Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
		
			
				
	
	
		
			51 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			ReStructuredText
		
	
	
	
	
	
			
		
		
	
	
			51 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			ReStructuredText
		
	
	
	
	
	
| Kernel driver adt7411
 | |
| =====================
 | |
| 
 | |
| Supported chips:
 | |
| 
 | |
|   * Analog Devices ADT7411
 | |
| 
 | |
|     Prefix: 'adt7411'
 | |
| 
 | |
|     Addresses scanned: 0x48, 0x4a, 0x4b
 | |
| 
 | |
|     Datasheet: Publicly available at the Analog Devices website
 | |
| 
 | |
| Author: Wolfram Sang (based on adt7470 by Darrick J. Wong)
 | |
| 
 | |
| Description
 | |
| -----------
 | |
| 
 | |
| This driver implements support for the Analog Devices ADT7411 chip. There may
 | |
| be other chips that implement this interface.
 | |
| 
 | |
| The ADT7411 can use an I2C/SMBus compatible 2-wire interface or an
 | |
| SPI-compatible 4-wire interface. It provides a 10-bit analog to digital
 | |
| converter which measures 1 temperature, vdd and 8 input voltages. It has an
 | |
| internal temperature sensor, but an external one can also be connected (one
 | |
| loses 2 inputs then). There are high- and low-limit registers for all inputs.
 | |
| 
 | |
| Check the datasheet for details.
 | |
| 
 | |
| sysfs-Interface
 | |
| ---------------
 | |
| 
 | |
| ================ =================
 | |
| in0_input	 vdd voltage input
 | |
| in[1-8]_input	 analog 1-8 input
 | |
| temp1_input	 temperature input
 | |
| ================ =================
 | |
| 
 | |
| Besides standard interfaces, this driver adds (0 = off, 1 = on):
 | |
| 
 | |
|   ============== =======================================================
 | |
|   adc_ref_vdd	 Use vdd as reference instead of 2.25 V
 | |
|   fast_sampling	 Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
 | |
|   no_average	 Turn off averaging over 16 samples
 | |
|   ============== =======================================================
 | |
| 
 | |
| Notes
 | |
| -----
 | |
| 
 | |
| SPI, external temperature sensor and limit registers are not supported yet.
 |