mirror of
				https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux
				synced 2025-11-04 16:52:06 +10:00 
			
		
		
		
	This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip RTC controller. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
		
			
				
	
	
		
			446 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			446 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Blackfin On-Chip Real Time Clock Driver
 | 
						|
 *  Supports BF531/BF532/BF533/BF534/BF536/BF537
 | 
						|
 *
 | 
						|
 * Copyright 2004-2007 Analog Devices Inc.
 | 
						|
 *
 | 
						|
 * Enter bugs at http://blackfin.uclinux.org/
 | 
						|
 *
 | 
						|
 * Licensed under the GPL-2 or later.
 | 
						|
 */
 | 
						|
 | 
						|
/* The biggest issue we deal with in this driver is that register writes are
 | 
						|
 * synced to the RTC frequency of 1Hz.  So if you write to a register and
 | 
						|
 * attempt to write again before the first write has completed, the new write
 | 
						|
 * is simply discarded.  This can easily be troublesome if userspace disables
 | 
						|
 * one event (say periodic) and then right after enables an event (say alarm).
 | 
						|
 * Since all events are maintained in the same interrupt mask register, if
 | 
						|
 * we wrote to it to disable the first event and then wrote to it again to
 | 
						|
 * enable the second event, that second event would not be enabled as the
 | 
						|
 * write would be discarded and things quickly fall apart.
 | 
						|
 *
 | 
						|
 * To keep this delay from significantly degrading performance (we, in theory,
 | 
						|
 * would have to sleep for up to 1 second everytime we wanted to write a
 | 
						|
 * register), we only check the write pending status before we start to issue
 | 
						|
 * a new write.  We bank on the idea that it doesnt matter when the sync
 | 
						|
 * happens so long as we don't attempt another write before it does.  The only
 | 
						|
 * time userspace would take this penalty is when they try and do multiple
 | 
						|
 * operations right after another ... but in this case, they need to take the
 | 
						|
 * sync penalty, so we should be OK.
 | 
						|
 *
 | 
						|
 * Also note that the RTC_ISTAT register does not suffer this penalty; its
 | 
						|
 * writes to clear status registers complete immediately.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/bcd.h>
 | 
						|
#include <linux/rtc.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
#include <linux/seq_file.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/spinlock.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
 | 
						|
#include <asm/blackfin.h>
 | 
						|
 | 
						|
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args)
 | 
						|
#define stampit() stamp("here i am")
 | 
						|
 | 
						|
struct bfin_rtc {
 | 
						|
	struct rtc_device *rtc_dev;
 | 
						|
	struct rtc_time rtc_alarm;
 | 
						|
	spinlock_t lock;
 | 
						|
};
 | 
						|
 | 
						|
/* Bit values for the ISTAT / ICTL registers */
 | 
						|
#define RTC_ISTAT_WRITE_COMPLETE  0x8000
 | 
						|
#define RTC_ISTAT_WRITE_PENDING   0x4000
 | 
						|
#define RTC_ISTAT_ALARM_DAY       0x0040
 | 
						|
#define RTC_ISTAT_24HR            0x0020
 | 
						|
#define RTC_ISTAT_HOUR            0x0010
 | 
						|
#define RTC_ISTAT_MIN             0x0008
 | 
						|
#define RTC_ISTAT_SEC             0x0004
 | 
						|
#define RTC_ISTAT_ALARM           0x0002
 | 
						|
#define RTC_ISTAT_STOPWATCH       0x0001
 | 
						|
 | 
						|
/* Shift values for RTC_STAT register */
 | 
						|
#define DAY_BITS_OFF    17
 | 
						|
#define HOUR_BITS_OFF   12
 | 
						|
#define MIN_BITS_OFF    6
 | 
						|
#define SEC_BITS_OFF    0
 | 
						|
 | 
						|
/* Some helper functions to convert between the common RTC notion of time
 | 
						|
 * and the internal Blackfin notion that is stored in 32bits.
 | 
						|
 */
 | 
						|
static inline u32 rtc_time_to_bfin(unsigned long now)
 | 
						|
{
 | 
						|
	u32 sec  = (now % 60);
 | 
						|
	u32 min  = (now % (60 * 60)) / 60;
 | 
						|
	u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
 | 
						|
	u32 days = (now / (60 * 60 * 24));
 | 
						|
	return (sec  << SEC_BITS_OFF) +
 | 
						|
	       (min  << MIN_BITS_OFF) +
 | 
						|
	       (hour << HOUR_BITS_OFF) +
 | 
						|
	       (days << DAY_BITS_OFF);
 | 
						|
}
 | 
						|
static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
 | 
						|
{
 | 
						|
	return (((rtc_bfin >> SEC_BITS_OFF)  & 0x003F)) +
 | 
						|
	       (((rtc_bfin >> MIN_BITS_OFF)  & 0x003F) * 60) +
 | 
						|
	       (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
 | 
						|
	       (((rtc_bfin >> DAY_BITS_OFF)  & 0x7FFF) * 60 * 60 * 24);
 | 
						|
}
 | 
						|
static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
 | 
						|
}
 | 
						|
 | 
						|
/* Wait for the previous write to a RTC register to complete.
 | 
						|
 * Unfortunately, we can't sleep here as that introduces a race condition when
 | 
						|
 * turning on interrupt events.  Consider this:
 | 
						|
 *  - process sets alarm
 | 
						|
 *  - process enables alarm
 | 
						|
 *  - process sleeps while waiting for rtc write to sync
 | 
						|
 *  - interrupt fires while process is sleeping
 | 
						|
 *  - interrupt acks the event by writing to ISTAT
 | 
						|
 *  - interrupt sets the WRITE PENDING bit
 | 
						|
 *  - interrupt handler finishes
 | 
						|
 *  - process wakes up, sees WRITE PENDING bit set, goes to sleep
 | 
						|
 *  - interrupt fires while process is sleeping
 | 
						|
 * If anyone can point out the obvious solution here, i'm listening :).  This
 | 
						|
 * shouldn't be an issue on an SMP or preempt system as this function should
 | 
						|
 * only be called with the rtc lock held.
 | 
						|
 */
 | 
						|
static void rtc_bfin_sync_pending(void)
 | 
						|
{
 | 
						|
	stampit();
 | 
						|
	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) {
 | 
						|
		if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
 | 
						|
			break;
 | 
						|
	}
 | 
						|
	bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
 | 
						|
}
 | 
						|
 | 
						|
static void rtc_bfin_reset(struct bfin_rtc *rtc)
 | 
						|
{
 | 
						|
	/* Initialize the RTC. Enable pre-scaler to scale RTC clock
 | 
						|
	 * to 1Hz and clear interrupt/status registers. */
 | 
						|
	spin_lock_irq(&rtc->lock);
 | 
						|
	rtc_bfin_sync_pending();
 | 
						|
	bfin_write_RTC_PREN(0x1);
 | 
						|
	bfin_write_RTC_ICTL(0);
 | 
						|
	bfin_write_RTC_SWCNT(0);
 | 
						|
	bfin_write_RTC_ALARM(0);
 | 
						|
	bfin_write_RTC_ISTAT(0xFFFF);
 | 
						|
	spin_unlock_irq(&rtc->lock);
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct platform_device *pdev = to_platform_device(dev_id);
 | 
						|
	struct bfin_rtc *rtc = platform_get_drvdata(pdev);
 | 
						|
	unsigned long events = 0;
 | 
						|
	u16 rtc_istat;
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	spin_lock_irq(&rtc->lock);
 | 
						|
 | 
						|
	rtc_istat = bfin_read_RTC_ISTAT();
 | 
						|
 | 
						|
	if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {
 | 
						|
		bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
 | 
						|
		events |= RTC_AF | RTC_IRQF;
 | 
						|
	}
 | 
						|
 | 
						|
	if (rtc_istat & RTC_ISTAT_STOPWATCH) {
 | 
						|
		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
 | 
						|
		events |= RTC_PF | RTC_IRQF;
 | 
						|
		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
 | 
						|
	}
 | 
						|
 | 
						|
	if (rtc_istat & RTC_ISTAT_SEC) {
 | 
						|
		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
 | 
						|
		events |= RTC_UF | RTC_IRQF;
 | 
						|
	}
 | 
						|
 | 
						|
	rtc_update_irq(rtc->rtc_dev, 1, events);
 | 
						|
 | 
						|
	spin_unlock_irq(&rtc->lock);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_open(struct device *dev)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev);
 | 
						|
	if (unlikely(ret)) {
 | 
						|
		dev_err(dev, "request RTC IRQ failed with %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	rtc_bfin_reset(rtc);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void bfin_rtc_release(struct device *dev)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	stampit();
 | 
						|
	rtc_bfin_reset(rtc);
 | 
						|
	free_irq(IRQ_RTC, dev);
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case RTC_PIE_ON:
 | 
						|
		stampit();
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);
 | 
						|
		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);
 | 
						|
		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH);
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
		return 0;
 | 
						|
	case RTC_PIE_OFF:
 | 
						|
		stampit();
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_SWCNT(0);
 | 
						|
		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH);
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
		return 0;
 | 
						|
 | 
						|
	case RTC_UIE_ON:
 | 
						|
		stampit();
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);
 | 
						|
		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC);
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
		return 0;
 | 
						|
	case RTC_UIE_OFF:
 | 
						|
		stampit();
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC);
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
		return 0;
 | 
						|
 | 
						|
	case RTC_AIE_ON: {
 | 
						|
		unsigned long rtc_alarm;
 | 
						|
		u16 which_alarm;
 | 
						|
		int ret = 0;
 | 
						|
 | 
						|
		stampit();
 | 
						|
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		if (rtc->rtc_alarm.tm_yday == -1) {
 | 
						|
			struct rtc_time now;
 | 
						|
			rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now);
 | 
						|
			now.tm_sec = rtc->rtc_alarm.tm_sec;
 | 
						|
			now.tm_min = rtc->rtc_alarm.tm_min;
 | 
						|
			now.tm_hour = rtc->rtc_alarm.tm_hour;
 | 
						|
			ret = rtc_tm_to_time(&now, &rtc_alarm);
 | 
						|
			which_alarm = RTC_ISTAT_ALARM;
 | 
						|
		} else {
 | 
						|
			ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm);
 | 
						|
			which_alarm = RTC_ISTAT_ALARM_DAY;
 | 
						|
		}
 | 
						|
		if (ret == 0) {
 | 
						|
			bfin_write_RTC_ISTAT(which_alarm);
 | 
						|
			bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
 | 
						|
			bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm);
 | 
						|
		}
 | 
						|
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
	case RTC_AIE_OFF:
 | 
						|
		stampit();
 | 
						|
		spin_lock_irq(&rtc->lock);
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
 | 
						|
		spin_unlock_irq(&rtc->lock);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	return -ENOIOCTLCMD;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	spin_lock_irq(&rtc->lock);
 | 
						|
	rtc_bfin_sync_pending();
 | 
						|
	rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
 | 
						|
	spin_unlock_irq(&rtc->lock);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	int ret;
 | 
						|
	unsigned long now;
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	spin_lock_irq(&rtc->lock);
 | 
						|
 | 
						|
	ret = rtc_tm_to_time(tm, &now);
 | 
						|
	if (ret == 0) {
 | 
						|
		rtc_bfin_sync_pending();
 | 
						|
		bfin_write_RTC_STAT(rtc_time_to_bfin(now));
 | 
						|
	}
 | 
						|
 | 
						|
	spin_unlock_irq(&rtc->lock);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	stampit();
 | 
						|
	memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time));
 | 
						|
	alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	stampit();
 | 
						|
	memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time));
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
 | 
						|
{
 | 
						|
#define yesno(x) (x ? "yes" : "no")
 | 
						|
	u16 ictl = bfin_read_RTC_ICTL();
 | 
						|
	stampit();
 | 
						|
	seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM));
 | 
						|
	seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY));
 | 
						|
	seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC));
 | 
						|
	seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH));
 | 
						|
#ifdef DEBUG
 | 
						|
	seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT());
 | 
						|
	seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL());
 | 
						|
	seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT());
 | 
						|
	seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT());
 | 
						|
	seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM());
 | 
						|
	seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN());
 | 
						|
#endif
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int bfin_irq_set_freq(struct device *dev, int freq)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = dev_get_drvdata(dev);
 | 
						|
	stampit();
 | 
						|
	rtc->rtc_dev->irq_freq = freq;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct rtc_class_ops bfin_rtc_ops = {
 | 
						|
	.open          = bfin_rtc_open,
 | 
						|
	.release       = bfin_rtc_release,
 | 
						|
	.ioctl         = bfin_rtc_ioctl,
 | 
						|
	.read_time     = bfin_rtc_read_time,
 | 
						|
	.set_time      = bfin_rtc_set_time,
 | 
						|
	.read_alarm    = bfin_rtc_read_alarm,
 | 
						|
	.set_alarm     = bfin_rtc_set_alarm,
 | 
						|
	.proc          = bfin_rtc_proc,
 | 
						|
	.irq_set_freq  = bfin_irq_set_freq,
 | 
						|
};
 | 
						|
 | 
						|
static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	stampit();
 | 
						|
 | 
						|
	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 | 
						|
	if (unlikely(!rtc))
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	spin_lock_init(&rtc->lock);
 | 
						|
 | 
						|
	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
 | 
						|
	if (unlikely(IS_ERR(rtc))) {
 | 
						|
		ret = PTR_ERR(rtc->rtc_dev);
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
	rtc->rtc_dev->irq_freq = 0;
 | 
						|
	rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */
 | 
						|
 | 
						|
	platform_set_drvdata(pdev, rtc);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err:
 | 
						|
	kfree(rtc);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	struct bfin_rtc *rtc = platform_get_drvdata(pdev);
 | 
						|
 | 
						|
	rtc_device_unregister(rtc->rtc_dev);
 | 
						|
	platform_set_drvdata(pdev, NULL);
 | 
						|
	kfree(rtc);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver bfin_rtc_driver = {
 | 
						|
	.driver		= {
 | 
						|
		.name	= "rtc-bfin",
 | 
						|
		.owner	= THIS_MODULE,
 | 
						|
	},
 | 
						|
	.probe		= bfin_rtc_probe,
 | 
						|
	.remove		= __devexit_p(bfin_rtc_remove),
 | 
						|
};
 | 
						|
 | 
						|
static int __init bfin_rtc_init(void)
 | 
						|
{
 | 
						|
	stampit();
 | 
						|
	return platform_driver_register(&bfin_rtc_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit bfin_rtc_exit(void)
 | 
						|
{
 | 
						|
	platform_driver_unregister(&bfin_rtc_driver);
 | 
						|
}
 | 
						|
 | 
						|
module_init(bfin_rtc_init);
 | 
						|
module_exit(bfin_rtc_exit);
 | 
						|
 | 
						|
MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
 | 
						|
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
 | 
						|
MODULE_LICENSE("GPL");
 |