mirror of
https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux
synced 2025-10-27 00:45:37 +10:00
19794489fa
The SoC is always present on sc7180-trogdor.dtsi and thus we should include it in the "generic" dtsi file for trogdor. Previously we had removed it from there because we had to do the spi6/spi0 swizzle, so each trogdor variant board had to include sc7180.dtsi and then sc7180-trogdor.dtsi so that the latter dtsi file could modify the right spi bus for EC and H1 properties that are common to all trogdor boards. Now that we're done with that we can replace sc7180.dtsi includes with sc7180-trogdor.dtsi and include sc7180.dtsi in sc7180-trogdor.dtsi as was originally intended. We still need to include sc7180-trogdor.dtsi before the bridge dtsi files though because those rely on the panel label. Cc: "Joseph S. Barrera III" <joebar@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427020339.360855-4-swboyd@chromium.org
1646 lines
30 KiB
Plaintext
1646 lines
30 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Google Trogdor device tree source (common between revisions)
|
|
*
|
|
* Copyright 2019 Google LLC.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
|
#include <dt-bindings/sound/sc7180-lpass.h>
|
|
|
|
#include "sc7180.dtsi"
|
|
/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
|
|
#include "pm6150.dtsi"
|
|
#include "pm6150l.dtsi"
|
|
|
|
/ {
|
|
thermal-zones {
|
|
charger_thermal: charger-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
|
|
thermal-sensors = <&pm6150_adc_tm 0>;
|
|
|
|
trips {
|
|
charger-crit {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Reserved memory changes
|
|
*
|
|
* Delete all unused memory nodes and define the peripheral memory regions
|
|
* required by the board dts.
|
|
*/
|
|
|
|
/delete-node/ &hyp_mem;
|
|
/delete-node/ &xbl_mem;
|
|
/delete-node/ &aop_mem;
|
|
/delete-node/ &sec_apps_mem;
|
|
/delete-node/ &tz_mem;
|
|
|
|
/* Increase the size from 2MB to 8MB */
|
|
&rmtfs_mem {
|
|
reg = <0x0 0x94600000 0x0 0x800000>;
|
|
};
|
|
|
|
/ {
|
|
reserved-memory {
|
|
atf_mem: memory@80b00000 {
|
|
reg = <0x0 0x80b00000 0x0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
mpss_mem: memory@86000000 {
|
|
reg = <0x0 0x86000000 0x0 0x2000000>;
|
|
no-map;
|
|
};
|
|
|
|
venus_mem: memory@8f600000 {
|
|
reg = <0 0x8f600000 0 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
wlan_mem: memory@94100000 {
|
|
reg = <0x0 0x94100000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
mba_mem: memory@94400000 {
|
|
reg = <0x0 0x94400000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
bluetooth0 = &bluetooth;
|
|
hsuart0 = &uart3;
|
|
serial0 = &uart8;
|
|
wifi0 = &wifi;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
/* FIXED REGULATORS - parents above children */
|
|
|
|
/* This is the top level supply and variable voltage */
|
|
ppvar_sys: ppvar-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ppvar_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* This divides ppvar_sys by 2, so voltage is variable */
|
|
src_vph_pwr: src-vph-pwr-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "src_vph_pwr";
|
|
|
|
/* EC turns on with switchcap_on; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp5000_a: pp5000-a-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp5000_a";
|
|
|
|
/* EC turns on with en_pp5000_a; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp3300_a: pp3300-a-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_a";
|
|
|
|
/* EC turns on with en_pp3300_a; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
/*
|
|
* Actually should be pp3300 but that's practically an alias for
|
|
* pp3300_a so we use pp3300's vin-supply here to avoid one more
|
|
* node.
|
|
*/
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp1800_ec:
|
|
pp1800_sensors:
|
|
pp1800_ldo: pp1800-ldo-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800_ldo";
|
|
|
|
/* EC turns on with hibernate_l; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
/*
|
|
* Actually should be pp1800_h1 but we don't have any need to
|
|
* model that so we use the parent of pp1800_h1.
|
|
*/
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp1800_uf_cam: pp1800-uf-cam-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800_uf_cam";
|
|
status = "disabled";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uf_cam_en>;
|
|
|
|
vin-supply = <&pp1800_ldo>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
pp1800_wf_cam: pp1800-wf-cam-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800_wf_cam";
|
|
status = "disabled";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_cam_en>;
|
|
|
|
vin-supply = <&pp1800_ldo>;
|
|
regulator-enable-ramp-delay = <1000>;
|
|
};
|
|
|
|
pp2800_uf_cam: pp2800-uf-cam-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp2800_uf_cam";
|
|
status = "disabled";
|
|
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
/*
|
|
* The pinconf can only be referenced once so we put it on the
|
|
* first regulator and comment it out here.
|
|
* pinctrl-names = "default";
|
|
* pinctrl-0 = <&uf_cam_en>;
|
|
*/
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp2800_vcm_wf_cam:
|
|
pp2800_wf_cam: pp2800-wf-cam-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp2800_wf_cam";
|
|
status = "disabled";
|
|
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
/*
|
|
* The pinconf can only be referenced once so we put it on the
|
|
* first regulator and comment it out here.
|
|
* pinctrl-names = "default";
|
|
* pinctrl-0 = <&wf_cam_en>;
|
|
*/
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp3300_audio:
|
|
pp3300_codec: pp3300-codec-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_codec";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&en_pp3300_codec>;
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp3300_dx_edp:
|
|
pp3300_ts: pp3300-dx-edp-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_dx_edp";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&en_pp3300_dx_edp>;
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp3300_fp_tp: pp3300-fp-tp-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_fp_tp";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
/* AP turns on with PP1800_VIO_OUT; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
pp3300_hub: pp3300-hub-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_hub";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&en_pp3300_hub>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&pp3300_a>;
|
|
};
|
|
|
|
/* BOARD-SPECIFIC TOP LEVEL NODES */
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
|
|
/* The panels don't seem to like anything below ~ 5% */
|
|
brightness-levels = <
|
|
196 256 324 400 484 576 676 784 900 1024 1156 1296
|
|
1444 1600 1764 1936 2116 2304 2500 2704 2916 3136
|
|
3364 3600 3844 4096
|
|
>;
|
|
num-interpolated-steps = <64>;
|
|
default-brightness-level = <951>;
|
|
|
|
pwms = <&cros_ec_pwm 1>;
|
|
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&ppvar_sys>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_edp_bklten>;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pen_pdct_l>;
|
|
|
|
pen_insert: pen-insert {
|
|
label = "Pen Insert";
|
|
|
|
/* Insert = low, eject = high */
|
|
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
|
|
linux,code = <SW_PEN_INSERTED>;
|
|
linux,input-type = <EV_SW>;
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
max98360a: audio-codec-0 {
|
|
compatible = "maxim,max98360a";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&_en>;
|
|
sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
pwmleds {
|
|
compatible = "pwm-leds";
|
|
keyboard_backlight: keyboard-backlight {
|
|
status = "disabled";
|
|
label = "cros_ec::kbd_backlight";
|
|
pwms = <&cros_ec_pwm 0>;
|
|
max-brightness = <1023>;
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "google,sc7180-trogdor";
|
|
model = "sc7180-rt5682-max98357a-1mic";
|
|
|
|
audio-routing =
|
|
"Headphone Jack", "HPOL",
|
|
"Headphone Jack", "HPOR";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dai-link@0 {
|
|
link-name = "MultiMedia0";
|
|
reg = <MI2S_PRIMARY>;
|
|
cpu {
|
|
sound-dai = <&lpass_cpu MI2S_PRIMARY>;
|
|
};
|
|
|
|
sound_multimedia0_codec: codec {
|
|
sound-dai = <&alc5682 0 /* aif1 */>;
|
|
};
|
|
};
|
|
|
|
dai-link@1 {
|
|
link-name = "MultiMedia1";
|
|
reg = <MI2S_SECONDARY>;
|
|
cpu {
|
|
sound-dai = <&lpass_cpu MI2S_SECONDARY>;
|
|
};
|
|
|
|
sound_multimedia1_codec: codec {
|
|
sound-dai = <&max98360a>;
|
|
};
|
|
};
|
|
|
|
dai-link@5 {
|
|
link-name = "MultiMedia2";
|
|
reg = <LPASS_DP_RX>;
|
|
cpu {
|
|
sound-dai = <&lpass_cpu LPASS_DP_RX>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&mdss_dp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qfprom {
|
|
vcc-supply = <&pp1800_l11a>;
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <37500000>;
|
|
spi-tx-bus-width = <2>;
|
|
spi-rx-bus-width = <2>;
|
|
};
|
|
};
|
|
|
|
&apps_rsc {
|
|
pm6150-rpmh-regulators {
|
|
compatible = "qcom,pm6150-rpmh-regulators";
|
|
qcom,pmic-id = "a";
|
|
|
|
vddpx_1:
|
|
vdd2:
|
|
pp1125_s1a: smps1 {
|
|
regulator-min-microvolt = <1128000>;
|
|
regulator-max-microvolt = <1128000>;
|
|
};
|
|
|
|
vdd_qlink_lv:
|
|
vdd_qlink_lv_ck:
|
|
vdd_qusb_hs0_core:
|
|
vdd_ufs1_core:
|
|
vdda_mipi_csi0_0p9:
|
|
vdda_mipi_csi1_0p9:
|
|
vdda_mipi_csi2_0p9:
|
|
vdda_mipi_csi3_0p9:
|
|
vdda_mipi_dsi0_pll:
|
|
vdda_pll_cc_ebi01:
|
|
vdda_qrefs_0p9:
|
|
vdda_usb_ss_dp_core:
|
|
pp900_l4a: ldo4 {
|
|
regulator-min-microvolt = <824000>;
|
|
regulator-max-microvolt = <928000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd_cx_wlan:
|
|
pp800_l9a: ldo9 {
|
|
regulator-min-microvolt = <488000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd1:
|
|
vddpx_3:
|
|
vddpx_7:
|
|
vio_in:
|
|
pp1800_l10a: ldo10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd_qfprom:
|
|
vdda_apc1_cs_1p8:
|
|
vdda_qrefs_1p8:
|
|
vdda_qusb_hs0_1p8:
|
|
vddpx_11:
|
|
vreg_bb_clk:
|
|
pp1800_l11a: ldo11 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
mcp_vccq:
|
|
pp1800_l12a_r: ldo12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
/*
|
|
* On trogdor this needs to match l10a since we use it to
|
|
* give power to things like SPI flash which communicate back
|
|
* on lines powered by l10a. Thus we force to 1.8V.
|
|
*/
|
|
pp1800_l13a: ldo13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp1800_prox:
|
|
pp1800_l14a: ldo14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp1800_alc5682:
|
|
pp1800_l15a: ldo15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdda_qusb_hs0_3p1:
|
|
vdd_pdphy:
|
|
pp3100_l17a: ldo17 {
|
|
regulator-min-microvolt = <2920000>;
|
|
regulator-max-microvolt = <3232000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp1800_pen:
|
|
pp1800_l18a: ldo18 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
mcp_vcc:
|
|
pp2850_l19a: ldo19 {
|
|
regulator-min-microvolt = <2960000>;
|
|
regulator-max-microvolt = <2960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
};
|
|
|
|
pm6150l-rpmh-regulators {
|
|
compatible = "qcom,pm6150l-rpmh-regulators";
|
|
qcom,pmic-id = "c";
|
|
|
|
pp1300_s8c: smps8 {
|
|
regulator-min-microvolt = <1120000>;
|
|
regulator-max-microvolt = <1408000>;
|
|
};
|
|
|
|
pp1800_l1c: ldo1 {
|
|
regulator-min-microvolt = <1616000>;
|
|
regulator-max-microvolt = <1984000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vdd_wcss_adc_dac:
|
|
pp1300_l2c: ldo2 {
|
|
regulator-min-microvolt = <1168000>;
|
|
regulator-max-microvolt = <1304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp1200_brij:
|
|
vdd_ufs1_1p2:
|
|
vdda_csi0_1p25:
|
|
vdda_csi1_1p25:
|
|
vdda_csi2_1p25:
|
|
vdda_csi3_1p25:
|
|
vdda_hv_ebi0:
|
|
vdda_mipi_dsi0_1p2:
|
|
vdda_usb_ss_dp_1p2:
|
|
vddpx_10:
|
|
pp1200_l3c: ldo3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
vddpx_2:
|
|
ppvar_l6c: ldo6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp3300_l7c: ldo7 {
|
|
regulator-min-microvolt = <3304000>;
|
|
regulator-max-microvolt = <3304000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp1800_brij_vccio:
|
|
pp1800_edp_vpll:
|
|
pp1800_l8c: ldo8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp2950_l9c: ldo9 {
|
|
regulator-min-microvolt = <2952000>;
|
|
regulator-max-microvolt = <2952000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp3300_l10c: ldo10 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
pp3300_l11c: ldo11 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
|
};
|
|
|
|
src_vreg_bob: bob {
|
|
regulator-min-microvolt = <3008000>;
|
|
regulator-max-microvolt = <3960000>;
|
|
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ap_ec_spi: &spi6 {
|
|
status = "okay";
|
|
cros_ec: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ap_ec_int_l>;
|
|
spi-max-frequency = <3000000>;
|
|
|
|
cros_ec_pwm: pwm {
|
|
compatible = "google,cros-ec-pwm";
|
|
#pwm-cells = <1>;
|
|
};
|
|
|
|
i2c_tunnel: i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
google,remote-bus = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
typec {
|
|
compatible = "google,cros-ec-typec";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb_c0: connector@0 {
|
|
compatible = "usb-c-connector";
|
|
reg = <0>;
|
|
label = "left";
|
|
power-role = "dual";
|
|
data-role = "host";
|
|
try-power-role = "source";
|
|
};
|
|
|
|
usb_c1: connector@1 {
|
|
compatible = "usb-c-connector";
|
|
reg = <1>;
|
|
label = "right";
|
|
power-role = "dual";
|
|
data-role = "host";
|
|
try-power-role = "source";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ap_h1_spi: &spi0 {
|
|
status = "okay";
|
|
cr50: tpm@0 {
|
|
compatible = "google,cr50";
|
|
reg = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&h1_ap_int_odl>;
|
|
spi-max-frequency = <800000>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <42 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
};
|
|
|
|
&camcc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
vdda-supply = <&vdda_mipi_dsi0_1p2>;
|
|
};
|
|
|
|
&dsi0_out {
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&dsi_phy {
|
|
status = "okay";
|
|
vdds-supply = <&vdda_mipi_dsi0_pll>;
|
|
};
|
|
|
|
ap_sar_sensor_i2c: &i2c5 {
|
|
clock-frequency = <400000>;
|
|
|
|
ap_sar_sensor: proximity@28 {
|
|
compatible = "semtech,sx9310";
|
|
reg = <0x28>;
|
|
#io-channel-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&p_sensor_int_l>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
vdd-supply = <&pp3300_a>;
|
|
svdd-supply = <&pp1800_prox>;
|
|
|
|
label = "proximity-wifi";
|
|
};
|
|
};
|
|
|
|
ap_tp_i2c: &i2c7 {
|
|
clock-frequency = <400000>;
|
|
|
|
trackpad: trackpad@15 {
|
|
compatible = "elan,ekth3000";
|
|
reg = <0x15>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tp_int_odl>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
vcc-supply = <&pp3300_fp_tp>;
|
|
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
hp_i2c: &i2c9 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
alc5682: codec@1a {
|
|
compatible = "realtek,rt5682i";
|
|
reg = <0x1a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_irq>;
|
|
|
|
#sound-dai-cells = <1>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
/*
|
|
* This will get ignored because the interrupt type
|
|
* is set in rt5682.c.
|
|
*/
|
|
interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
|
|
|
|
AVDD-supply = <&pp1800_alc5682>;
|
|
MICVDD-supply = <&pp3300_codec>;
|
|
VBAT-supply = <&pp3300_audio>;
|
|
|
|
realtek,dmic1-data-pin = <1>;
|
|
realtek,dmic1-clk-pin = <1>;
|
|
realtek,jd-src = <1>;
|
|
};
|
|
};
|
|
|
|
&lpass_cpu {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mi2s@0 {
|
|
reg = <MI2S_PRIMARY>;
|
|
qcom,playback-sd-lines = <1>;
|
|
qcom,capture-sd-lines = <0>;
|
|
};
|
|
|
|
secondary_mi2s: mi2s@1 {
|
|
reg = <MI2S_SECONDARY>;
|
|
qcom,playback-sd-lines = <0>;
|
|
};
|
|
|
|
hdmi@5 {
|
|
reg = <LPASS_DP_RX>;
|
|
};
|
|
};
|
|
|
|
&mdp {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdss_dp {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dp_hot_plug_det>;
|
|
data-lanes = <0 1>;
|
|
vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
|
|
vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
|
|
};
|
|
|
|
&pm6150_adc {
|
|
charger-thermistor@4f {
|
|
reg = <ADC5_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
};
|
|
|
|
&pm6150_adc_tm {
|
|
status = "okay";
|
|
|
|
charger-thermistor@0 {
|
|
reg = <0>;
|
|
io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time-us = <200>;
|
|
};
|
|
};
|
|
|
|
&pm6150_pon {
|
|
status = "disabled";
|
|
};
|
|
|
|
&qupv3_id_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qupv3_id_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&remoteproc_mpss {
|
|
status = "okay";
|
|
compatible = "qcom,sc7180-mss-pil";
|
|
iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
|
|
memory-region = <&mba_mem &mpss_mem>;
|
|
|
|
/* This gets overridden for SKUs with LTE support. */
|
|
firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
|
|
"qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
vmmc-supply = <&mcp_vcc>;
|
|
vqmmc-supply = <&mcp_vccq>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
vmmc-supply = <&pp2950_l9c>;
|
|
vqmmc-supply = <&ppvar_l6c>;
|
|
|
|
cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
|
|
cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&spi6 {
|
|
pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
|
|
cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
ap_spi_fp: &spi10 {
|
|
pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
|
|
cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
|
|
|
|
cros_ec_fp: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fp_to_ap_irq_l>;
|
|
spi-max-frequency = <3000000>;
|
|
};
|
|
};
|
|
|
|
#include <arm/cros-ec-keyboard.dtsi>
|
|
#include <arm/cros-ec-sbs.dtsi>
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
|
|
/delete-property/interrupts;
|
|
interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-1 = <&qup_uart3_sleep>;
|
|
|
|
bluetooth: bluetooth {
|
|
compatible = "qcom,wcn3991-bt";
|
|
vddio-supply = <&pp1800_l10a>;
|
|
vddxo-supply = <&pp1800_l1c>;
|
|
vddrf-supply = <&pp1300_l2c>;
|
|
vddch0-supply = <&pp3300_l10c>;
|
|
max-speed = <3200000>;
|
|
};
|
|
};
|
|
|
|
&uart8 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1_dwc3 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usb_1_hsphy {
|
|
status = "okay";
|
|
vdd-supply = <&vdd_qusb_hs0_core>;
|
|
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
|
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
|
qcom,imp-res-offset-value = <8>;
|
|
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
|
|
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
|
qcom,bias-ctrl-value = <0x22>;
|
|
qcom,charge-ctrl-value = <3>;
|
|
qcom,hsdisc-trim-value = <0>;
|
|
};
|
|
|
|
&usb_1_qmpphy {
|
|
status = "okay";
|
|
vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
|
|
vdda-pll-supply = <&vdda_usb_ss_dp_core>;
|
|
};
|
|
|
|
&venus {
|
|
video-firmware {
|
|
iommus = <&apps_smmu 0x0c42 0x0>;
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
|
|
vdd-1.8-xo-supply = <&pp1800_l1c>;
|
|
vdd-1.3-rfa-supply = <&pp1300_l2c>;
|
|
vdd-3.3-ch0-supply = <&pp3300_l10c>;
|
|
vdd-3.3-ch1-supply = <&pp3300_l11c>;
|
|
|
|
wifi-firmware {
|
|
iommus = <&apps_smmu 0xc2 0x1>;
|
|
};
|
|
};
|
|
|
|
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
|
|
|
|
&dp_hot_plug_det {
|
|
pinconf {
|
|
pins = "gpio117";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&pri_mi2s_active {
|
|
pinconf {
|
|
pins = "gpio53", "gpio54", "gpio55", "gpio56";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&pri_mi2s_mclk_active {
|
|
pinconf {
|
|
pins = "gpio57";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
&qspi_cs0 {
|
|
pinconf {
|
|
pins = "gpio68";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qspi_clk {
|
|
pinconf {
|
|
pins = "gpio63";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qspi_data01 {
|
|
pinconf {
|
|
pins = "gpio64", "gpio65";
|
|
|
|
/* High-Z when no transfers; nice to park the lines */
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&qup_i2c2_default {
|
|
pinconf {
|
|
pins = "gpio15", "gpio16";
|
|
drive-strength = <2>;
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_i2c4_default {
|
|
pinconf {
|
|
pins = "gpio115", "gpio116";
|
|
drive-strength = <2>;
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_i2c5_default {
|
|
pinconf {
|
|
pins = "gpio25", "gpio26";
|
|
drive-strength = <2>;
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_i2c7_default {
|
|
pinconf {
|
|
pins = "gpio6", "gpio7";
|
|
drive-strength = <2>;
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_i2c9_default {
|
|
pinconf {
|
|
pins = "gpio46", "gpio47";
|
|
drive-strength = <2>;
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_spi0_cs_gpio {
|
|
pinconf {
|
|
pins = "gpio34", "gpio35", "gpio36", "gpio37";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_spi6_cs_gpio {
|
|
pinconf {
|
|
pins = "gpio59", "gpio60", "gpio61", "gpio62";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_spi10_cs_gpio {
|
|
pinconf {
|
|
pins = "gpio86", "gpio87", "gpio88", "gpio89";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&qup_uart3_default {
|
|
pinconf-cts {
|
|
/*
|
|
* Configure a pull-down on CTS to match the pull of
|
|
* the Bluetooth module.
|
|
*/
|
|
pins = "gpio38";
|
|
bias-pull-down;
|
|
};
|
|
|
|
pinconf-rts-tx {
|
|
/* We'll drive RTS and TX, so no pull */
|
|
pins = "gpio39", "gpio40";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinconf-rx {
|
|
/*
|
|
* Configure a pull-up on RX. This is needed to avoid
|
|
* garbage data when the TX pin of the Bluetooth module is
|
|
* in tri-state (module powered off or not driving the
|
|
* signal yet).
|
|
*/
|
|
pins = "gpio41";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&qup_uart8_default {
|
|
pinconf-tx {
|
|
pins = "gpio44";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinconf-rx {
|
|
pins = "gpio45";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
&sec_mi2s_active {
|
|
pinconf {
|
|
pins = "gpio49", "gpio50", "gpio51";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
/* PINCTRL - board-specific pinctrl */
|
|
|
|
&pm6150_gpio {
|
|
status = "disabled"; /* No GPIOs are connected */
|
|
};
|
|
|
|
&pm6150l_gpio {
|
|
gpio-line-names = "AP_SUSPEND",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"",
|
|
"";
|
|
};
|
|
|
|
&tlmm {
|
|
/*
|
|
* pinctrl settings for pins that have no real owners.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
|
|
|
|
amp_en: amp-en {
|
|
pinmux {
|
|
pins = "gpio23";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio23";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
ap_ec_int_l: ap-ec-int-l {
|
|
pinmux {
|
|
pins = "gpio94";
|
|
function = "gpio";
|
|
input-enable;
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio94";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
ap_edp_bklten: ap-edp-bklten {
|
|
pinmux {
|
|
pins = "gpio12";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio12";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
|
|
/* Force backlight to be disabled to match state at boot. */
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
ap_suspend_l_neuter: ap-suspend-l-neuter {
|
|
pinmux {
|
|
pins = "gpio27";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio27";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
bios_flash_wp_l: bios-flash-wp-l {
|
|
pinmux {
|
|
pins = "gpio66";
|
|
function = "gpio";
|
|
input-enable;
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio66";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
edp_brij_en: edp-brij-en {
|
|
pinmux {
|
|
pins = "gpio104";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio104";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
en_pp3300_codec: en-pp3300-codec {
|
|
pinmux {
|
|
pins = "gpio83";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio83";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
en_pp3300_dx_edp: en-pp3300-dx-edp {
|
|
pinmux {
|
|
pins = "gpio30";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio30";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
en_pp3300_hub: en-pp3300-hub {
|
|
pinmux {
|
|
pins = "gpio84";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio84";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
fp_to_ap_irq_l: fp-to-ap-irq-l {
|
|
pinmux {
|
|
pins = "gpio4";
|
|
function = "gpio";
|
|
input-enable;
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio4";
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
h1_ap_int_odl: h1-ap-int-odl {
|
|
pinmux {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
input-enable;
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio42";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
hp_irq: hp-irq {
|
|
pinmux {
|
|
pins = "gpio28";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio28";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pen_irq_l: pen-irq-l {
|
|
pinmux {
|
|
pins = "gpio21";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio21";
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pen_pdct_l: pen-pdct-l {
|
|
pinmux {
|
|
pins = "gpio52";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio52";
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pen_rst_odl: pen-rst-odl {
|
|
pinmux {
|
|
pins = "gpio18";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio18";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
|
|
/*
|
|
* The pen driver doesn't currently support
|
|
* driving this reset line. By specifying
|
|
* output-high here we're relying on the fact
|
|
* that this pin has a default pulldown at boot
|
|
* (which makes sure the pen was in reset if it
|
|
* was powered) and then we set it high here to
|
|
* take it out of reset. Better would be if the
|
|
* pen driver could control this and we could
|
|
* remove "output-high" here.
|
|
*/
|
|
output-high; /* TODO: Remove this? */
|
|
};
|
|
};
|
|
|
|
p_sensor_int_l: p-sensor-int-l {
|
|
pinmux {
|
|
pins = "gpio24";
|
|
function = "gpio";
|
|
input-enable;
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio24";
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
|
|
pinconf {
|
|
pins = "gpio37";
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
|
|
pinconf {
|
|
pins = "gpio62";
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
|
|
pinconf {
|
|
pins = "gpio89";
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
qup_uart3_sleep: qup-uart3-sleep {
|
|
pinmux {
|
|
pins = "gpio38", "gpio39",
|
|
"gpio40", "gpio41";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf-cts {
|
|
/*
|
|
* Configure a pull-down on CTS to match the pull of
|
|
* the Bluetooth module.
|
|
*/
|
|
pins = "gpio38";
|
|
bias-pull-down;
|
|
};
|
|
|
|
pinconf-rts {
|
|
/*
|
|
* Configure pull-down on RTS. As RTS is active low
|
|
* signal, pull it low to indicate the BT SoC that it
|
|
* can wakeup the system anytime from suspend state by
|
|
* pulling RX low (by sending wakeup bytes).
|
|
*/
|
|
pins = "gpio39";
|
|
bias-pull-down;
|
|
};
|
|
|
|
pinconf-tx {
|
|
/*
|
|
* Configure pull-up on TX when it isn't actively driven
|
|
* to prevent BT SoC from receiving garbage during sleep.
|
|
*/
|
|
pins = "gpio40";
|
|
bias-pull-up;
|
|
};
|
|
|
|
pinconf-rx {
|
|
/*
|
|
* Configure a pull-up on RX. This is needed to avoid
|
|
* garbage data when the TX pin of the Bluetooth module
|
|
* is floating which may cause spurious wakeups.
|
|
*/
|
|
pins = "gpio41";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
/* Named trackpad_int_1v8_odl on earlier revision schematics */
|
|
trackpad_int_1v8_odl:
|
|
tp_int_odl: tp-int-odl {
|
|
pinmux {
|
|
pins = "gpio0";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio0";
|
|
|
|
/* Has external pullup */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
ts_int_l: ts-int-l {
|
|
pinmux {
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio9";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
ts_reset_l: ts-reset-l {
|
|
pinmux {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio8";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
sdc1_on: sdc1-on {
|
|
pinconf-clk {
|
|
pins = "sdc1_clk";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
pinconf-cmd {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
pinconf-data {
|
|
pins = "sdc1_data";
|
|
bias-pull-up;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
pinconf-rclk {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdc1_off: sdc1-off {
|
|
pinconf-clk {
|
|
pins = "sdc1_clk";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-cmd {
|
|
pins = "sdc1_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-data {
|
|
pins = "sdc1_data";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-rclk {
|
|
pins = "sdc1_rclk";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sdc2_on: sdc2-on {
|
|
pinconf-clk {
|
|
pins = "sdc2_clk";
|
|
bias-disable;
|
|
drive-strength = <16>;
|
|
};
|
|
|
|
pinconf-cmd {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
pinconf-data {
|
|
pins = "sdc2_data";
|
|
bias-pull-up;
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
pinconf-sd-cd {
|
|
pins = "gpio69";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
sdc2_off: sdc2-off {
|
|
pinconf-clk {
|
|
pins = "sdc2_clk";
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-cmd {
|
|
pins = "sdc2_cmd";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-data {
|
|
pins = "sdc2_data";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
|
|
pinconf-sd-cd {
|
|
pins = "gpio69";
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
uf_cam_en: uf-cam-en {
|
|
pinmux {
|
|
pins = "gpio6";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio6";
|
|
drive-strength = <2>;
|
|
/* External pull down */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
wf_cam_en: wf-cam-en {
|
|
pinmux {
|
|
pins = "gpio7";
|
|
function = "gpio";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio7";
|
|
drive-strength = <2>;
|
|
/* External pull down */
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|