ata changes for 6.15

- Add 'external' to the libata.force module parameter, in order to
    allow a user to workaround broken firmware (me)
 
  - Use the str_up_down() helper in the sata_via driver (Salah Triki)
 
  - Convert the Freescale PowerQUICC SATA device tree binding to YAML
    (J. Neuschäfer)
 
  - Do not use ATAPI DMA for a device that only supports PIO (me)
 
  - Add Marvell 88SE9215 PCI device ID to the ahci driver.
    Since the controller has quirks, it cannot rely on the generic
    AHCI PCI class code entry (Daniel Kral)
 
  - Improve the return value of atapi_check_dma() (Huacai Chen)
 
  - Fix the NCQ Non-Data log not supported print to actually reference
    the correct log (me)
 
  - Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)
 
  - Simplify the AHCI IRQ vector allocations by performing the IRQ
    vector allocations in the same function, regardless of IRQ type
    (Tomas Henzl)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZ+MDSwAKCRDJZDGjmcZN
 ctr2AQCu7c9GPgL6VbVIzgoTdHqN39f7YuyajWxsNKi0832CTAEAkkk2exqa1tMy
 3gFmHcKqm1PoWD2VhjU6odzHy0UtQQY=
 =61mg
 -----END PGP SIGNATURE-----

Merge tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

Pull ata updates from Niklas Cassel:

 - Add 'external' to the libata.force module parameter, in order to
   allow a user to workaround broken firmware (me)

 - Use the str_up_down() helper in the sata_via driver (Salah Triki)

 - Convert the Freescale PowerQUICC SATA device tree binding to YAML
   (J. Neuschäfer)

 - Do not use ATAPI DMA for a device that only supports PIO (me)

 - Add Marvell 88SE9215 PCI device ID to the ahci driver. Since the
   controller has quirks, it cannot rely on the generic AHCI PCI class
   code entry (Daniel Kral)

 - Improve the return value of atapi_check_dma() (Huacai Chen)

 - Fix the NCQ Non-Data log not supported print to actually reference
   the correct log (me)

 - Make Marvel 88SE9215 prefer DMA for ATAPI devices (Huacai Chen)

 - Simplify the AHCI IRQ vector allocations by performing the IRQ vector
   allocations in the same function, regardless of IRQ type (Tomas
   Henzl)

* tag 'ata-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
  ata: ahci: simplify init function
  ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI
  ata: libata: Fix NCQ Non-Data log not supported print
  ata: libata: Improve return value of atapi_check_dma()
  ahci: add PCI ID for Marvell 88SE9215 SATA Controller
  ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode
  dt-bindings: ata: Convert fsl,pq-sata to YAML
  ata: sata_via: Use str_up_down() helper in vt6420_prereset()
  ata: libata-core: Add 'external' to the libata.force kernel parameter

Documentation/admin-guide/kernel-parameters.txt

@@ -3117,6 +3117,8 @@
 			* max_sec_lba48: Set or clear transfer size limit to
 			  65535 sectors.
 
+			* external: Mark port as external (hotplug-capable).
+
 			* [no]lpm: Enable or disable link power management.
 
 			* [no]setxfer: Indicate if transfer speed mode setting

Documentation/devicetree/bindings/ata/fsl,pq-sata.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/fsl,pq-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale 8xxx/3.0 Gb/s SATA nodes
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,mpc8377-sata
+              - fsl,mpc8536-sata
+              - fsl,mpc8315-sata
+              - fsl,mpc8379-sata
+          - const: fsl,pq-sata
+      - const: fsl,pq-sata-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    description: |
+      1 for controller @ 0x18000
+      2 for controller @ 0x19000
+      3 for controller @ 0x1a000
+      4 for controller @ 0x1b000
+
+required:
+  - compatible
+  - interrupts
+  - cell-index
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    sata@18000 {
+        compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+        reg = <0x18000 0x1000>;
+        cell-index = <1>;
+        interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+...

Documentation/devicetree/bindings/ata/fsl-sata.txt

@@ -1,28 +0,0 @@
-* Freescale 8xxx/3.0 Gb/s SATA nodes
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA port should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains 2 entries, first is
-		 "fsl,CHIP-sata", where CHIP is the processor
-		 (mpc8315, mpc8379, etc.) and the second is
-		 "fsl,pq-sata"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- cell-index        : controller index.
-                          1 for controller @ 0x18000
-                          2 for controller @ 0x19000
-                          3 for controller @ 0x1a000
-                          4 for controller @ 0x1b000
-
-Optional properties:
-- reg               : <registers mapping>
-
-Example:
-	sata@18000 {
-		compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-		reg = <0x18000 0x1000>;
-		cell-index = <1>;
-		interrupts = <2c 8>;
-		interrupt-parent = < &ipic >;
-	};

drivers/ata/ahci.c

@@ -63,6 +63,7 @@ enum board_ids {
 	board_ahci_pcs_quirk_no_devslp,
 	board_ahci_pcs_quirk_no_sntf,
 	board_ahci_yes_fbs,
+	board_ahci_yes_fbs_atapi_dma,
 
 	/* board IDs for specific chipsets in alphabetical order */
 	board_ahci_al,
@@ -188,6 +189,14 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	[board_ahci_yes_fbs_atapi_dma] = {
+		AHCI_HFLAGS	(AHCI_HFLAG_YES_FBS |
+				 AHCI_HFLAG_ATAPI_DMA_QUIRK),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 	/* by chipsets */
 	[board_ahci_al] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_MSI),
@@ -589,6 +598,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9215),
+	  .driver_data = board_ahci_yes_fbs_atapi_dma },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9235),
@@ -1665,13 +1676,15 @@ static int ahci_get_irq_vector(struct ata_host *host, int port)
 	return pci_irq_vector(to_pci_dev(host->dev), port);
 }
 
-static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
+static void ahci_init_irq(struct pci_dev *pdev, unsigned int n_ports,
 			struct ahci_host_priv *hpriv)
 {
 	int nvec;
 
-	if (hpriv->flags & AHCI_HFLAG_NO_MSI)
-		return -ENODEV;
+	if (hpriv->flags & AHCI_HFLAG_NO_MSI) {
+		pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_INTX);
+		return;
+	}
 
 	/*
 	 * If number of MSIs is less than number of ports then Sharing Last
@@ -1685,7 +1698,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 			if (!(readl(hpriv->mmio + HOST_CTL) & HOST_MRSM)) {
 				hpriv->get_irq_vector = ahci_get_irq_vector;
 				hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-				return nvec;
+				return;
 			}
 
 			/*
@@ -1700,12 +1713,13 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 
 	/*
 	 * If the host is not capable of supporting per-port vectors, fall
-	 * back to single MSI before finally attempting single MSI-X.
+	 * back to single MSI before finally attempting single MSI-X or
+	 * a legacy INTx.
 	 */
 	nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
 	if (nvec == 1)
-		return nvec;
-	return pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX);
+		return;
+	pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSIX | PCI_IRQ_INTX);
 }
 
 static void ahci_mark_external_port(struct ata_port *ap)
@@ -1985,10 +1999,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	host->private_data = hpriv;
 
-	if (ahci_init_msi(pdev, n_ports, hpriv) < 0) {
-		/* legacy intx interrupts */
-		pcim_intx(pdev, 1);
-	}
+	ahci_init_irq(pdev, n_ports, hpriv);
+
 	hpriv->irq = pci_irq_vector(pdev, 0);
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)

drivers/ata/ahci.h

@@ -246,6 +246,7 @@ enum {
 	AHCI_HFLAG_NO_SXS		= BIT(26), /* SXS not supported */
 	AHCI_HFLAG_43BIT_ONLY		= BIT(27), /* 43bit DMA addr limit */
 	AHCI_HFLAG_INTEL_PCS_QUIRK	= BIT(28), /* apply Intel PCS quirk */
+	AHCI_HFLAG_ATAPI_DMA_QUIRK	= BIT(29), /* force ATAPI to use DMA */
 
 	/* ap->flags bits */
 

drivers/ata/libahci.c

@@ -1322,6 +1322,10 @@ static void ahci_dev_config(struct ata_device *dev)
 {
 	struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
 
+	if ((dev->class == ATA_DEV_ATAPI) &&
+	    (hpriv->flags & AHCI_HFLAG_ATAPI_DMA_QUIRK))
+		dev->quirks |= ATA_QUIRK_ATAPI_MOD16_DMA;
+
 	if (hpriv->flags & AHCI_HFLAG_SECT255) {
 		dev->max_sectors = 255;
 		ata_dev_info(dev,

drivers/ata/libata-core.c

@@ -88,6 +88,7 @@ struct ata_force_param {
 	unsigned int	xfer_mask;
 	unsigned int	quirk_on;
 	unsigned int	quirk_off;
+	unsigned int	pflags_on;
 	u16		lflags_on;
 	u16		lflags_off;
 };
@@ -331,6 +332,35 @@ void ata_force_cbl(struct ata_port *ap)
 	}
 }
 
+/**
+ *	ata_force_pflags - force port flags according to libata.force
+ *	@ap: ATA port of interest
+ *
+ *	Force port flags according to libata.force and whine about it.
+ *
+ *	LOCKING:
+ *	EH context.
+ */
+static void ata_force_pflags(struct ata_port *ap)
+{
+	int i;
+
+	for (i = ata_force_tbl_size - 1; i >= 0; i--) {
+		const struct ata_force_ent *fe = &ata_force_tbl[i];
+
+		if (fe->port != -1 && fe->port != ap->print_id)
+			continue;
+
+		/* let pflags stack */
+		if (fe->param.pflags_on) {
+			ap->pflags |= fe->param.pflags_on;
+			ata_port_notice(ap,
+					"FORCE: port flag 0x%x forced -> 0x%x\n",
+					fe->param.pflags_on, ap->pflags);
+		}
+	}
+}
+
 /**
  *	ata_force_link_limits - force link limits according to libata.force
  *	@link: ATA link of interest
@@ -486,6 +516,7 @@ static void ata_force_quirks(struct ata_device *dev)
 	}
 }
 #else
+static inline void ata_force_pflags(struct ata_port *ap) { }
 static inline void ata_force_link_limits(struct ata_link *link) { }
 static inline void ata_force_xfermask(struct ata_device *dev) { }
 static inline void ata_force_quirks(struct ata_device *dev) { }
@@ -2243,7 +2274,7 @@ static void ata_dev_config_ncq_non_data(struct ata_device *dev)
 
 	if (!ata_log_supported(dev, ATA_LOG_NCQ_NON_DATA)) {
 		ata_dev_warn(dev,
-			     "NCQ Send/Recv Log not supported\n");
+			     "NCQ Non-Data Log not supported\n");
 		return;
 	}
 	err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_NON_DATA,
@@ -4552,7 +4583,7 @@ int atapi_check_dma(struct ata_queued_cmd *qc)
 	 */
 	if (!(qc->dev->quirks & ATA_QUIRK_ATAPI_MOD16_DMA) &&
 	    unlikely(qc->nbytes & 15))
-		return 1;
+		return -EOPNOTSUPP;
 
 	if (ap->ops->check_atapi_dma)
 		return ap->ops->check_atapi_dma(qc);
@@ -5460,6 +5491,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 #endif
 	ata_sff_port_init(ap);
 
+	ata_force_pflags(ap);
+
 	return ap;
 }
 EXPORT_SYMBOL_GPL(ata_port_alloc);
@@ -6272,6 +6305,9 @@ EXPORT_SYMBOL_GPL(ata_platform_remove_one);
 	{ "no" #name,	.lflags_on	= (flags) },	\
 	{ #name,	.lflags_off	= (flags) }
 
+#define force_pflag_on(name, flags)			\
+	{ #name,	.pflags_on	= (flags) }
+
 #define force_quirk_on(name, flag)			\
 	{ #name,	.quirk_on	= (flag) }
 
@@ -6331,6 +6367,8 @@ static const struct ata_force_param force_tbl[] __initconst = {
 	force_lflag_on(rstonce,		ATA_LFLAG_RST_ONCE),
 	force_lflag_onoff(dbdelay,	ATA_LFLAG_NO_DEBOUNCE_DELAY),
 
+	force_pflag_on(external,	ATA_PFLAG_EXTERNAL),
+
 	force_quirk_onoff(ncq,		ATA_QUIRK_NONCQ),
 	force_quirk_onoff(ncqtrim,	ATA_QUIRK_NO_NCQ_TRIM),
 	force_quirk_onoff(ncqati,	ATA_QUIRK_NO_NCQ_ON_ATI),

drivers/ata/libata-eh.c

@@ -1542,8 +1542,15 @@ unsigned int atapi_eh_request_sense(struct ata_device *dev,
 	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
 	tf.command = ATA_CMD_PACKET;
 
-	/* is it pointless to prefer PIO for "safety reasons"? */
-	if (ap->flags & ATA_FLAG_PIO_DMA) {
+	/*
+	 * Do not use DMA if the connected device only supports PIO, even if the
+	 * port prefers PIO commands via DMA.
+	 *
+	 * Ideally, we should call atapi_check_dma() to check if it is safe for
+	 * the LLD to use DMA for REQUEST_SENSE, but we don't have a qc.
+	 * Since we can't check the command, perhaps we should only use pio?
+	 */
+	if ((ap->flags & ATA_FLAG_PIO_DMA) && !(dev->flags & ATA_DFLAG_PIO)) {
 		tf.protocol = ATAPI_PROT_DMA;
 		tf.feature |= ATAPI_PKT_DMA;
 	} else {

drivers/ata/sata_via.c

@@ -25,6 +25,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
+#include <linux/string_choices.h>
 
 #define DRV_NAME	"sata_via"
 #define DRV_VERSION	"2.6"
@@ -359,7 +360,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
 
 	ata_port_info(ap,
 		      "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
-		      online ? "up" : "down", sstatus, scontrol);
+		      str_up_down(online), sstatus, scontrol);
 
 	/* SStatus is read one more time */
 	svia_scr_read(link, SCR_STATUS, &sstatus);