linux-stable/drivers
Jacob Keller fc9173682d fm10k: introduce a message queue for MAC/VLAN messages
Under some circumstances, when dealing with a large number of MAC
address or VLAN updates at once, the fm10k driver, particularly the VFs
can overload the mailbox with too many messages at once.

This results in a mailbox timeout, which causes the driver to initiate
a reset. During the reset, we re-send all the same messages that
originally caused the timeout. This results in a cycle of resets each
triggering a future reset.

To fix or avoid this, we introduce a workqueue item which monitors
a queue of MAC and VLAN requests. These requests are queued to the end
of the list, and we process as a FIFO periodically.

Initially we only handle requests for the netdev, but we do handle
unicast MAC addresses, multicast MAC addresses, and update VLAN
requests.

A future patch will add support to use this queue for handling MAC
update requests from the VF<->PF mailbox.

The MAC/VLAN work item will keep checking to make sure that each request
does not overflow the mailbox and cause a timeout. If it might, then the
work item will reschedule itself a short time later. This avoids any
reset cycle, since we never send the message if the mailbox is not
ready.

As an alternative, we tried increasing the mailbox message FIFO, but
this just delays the problem and results in needless memory waste on the
system. Our new message queue is dynamically allocated so only uses as
much memory as it needs. Additionally, it need not be contiguous like
the Tx and Rx FIFOs.

Note that this patch chose to only create a queue for MAC and VLAN
messages, since these are the only messages sent in a large enough
volume to cause the reset loop. Other messages are very unlikely to
overflow the mailbox Tx FIFO so easily.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-03 08:25:36 -07:00
..
accessibility
acpi
amba
android
ata
atm
auxdisplay
base
bcma
block
bluetooth
bus
cdrom
char
clk
clocksource
connector
cpufreq
cpuidle
crypto
dax
dca
devfreq
dio
dma
dma-buf
edac
eisa
extcon
firewire
firmware
fmc
fpga
fsi
gpio
gpu
hid
hsi
hv
hwmon
hwspinlock
hwtracing
i2c
ide
idle
iio
infiniband
input
iommu
ipack
irqchip
isdn
leds
lightnvm
macintosh
mailbox
mcb
md
media
memory
memstick
message
mfd
misc
mmc
mtd
mux
net fm10k: introduce a message queue for MAC/VLAN messages 2017-10-03 08:25:36 -07:00
nfc
ntb
nubus
nvdimm
nvme
nvmem
of
oprofile
parisc
parport
pci
pcmcia
perf
phy
pinctrl
platform
pnp
power
powercap
pps
ps3
ptp
pwm
rapidio
ras
regulator
remoteproc
reset
rpmsg
rtc
s390
sbus
scsi
sfi
sh
sn
soc
spi
spmi
ssb
staging
target
tc
tee
thermal
thunderbolt thunderbolt: Allocate ring HopID automatically if requested 2017-10-02 11:24:41 -07:00
tty
uio
usb
uwb
vfio
vhost
video
virt
virtio
vlynq
vme
w1
watchdog
xen
zorro
Kconfig
Makefile